NJ Zoning Check

Saddle River zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Saddle River's R-1 or R-2 Zone and see, line by line, whether a house or addition meets the Borough's lot, yard, height and coverage limits. The check is free.

Covers the Borough of Saddle River's single-family zones R-1 and R-2, Bergen County. Checks a new house, an addition or an attached garage.

Numbers last checked November 15, 2026 against the Borough's Limiting Schedule.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Saddle River

Saddle River has 2 single-family zones covered here: R-1 and R-2. Minimum lot sizes run from 11,250 sq ft (R-2) to 2 acres (R-1). A house must sit 75 ft (R-2) to 125 ft (R-1) back from the street and 25 ft (R-2) to 50 ft (R-1) from the rear lot line. Houses can be up to 35 ft tall. Buildings may cover up to 7% of the lot.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
75 to 125 ft
From each side
15 to 40 ft
From the back
25 to 50 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightHouse coverageTotal improved lot coverage
R-1Lots of 2 acres125 ftVaries50 ft35 ft, 2.5 stories7%21%
R-2Lots of 11,250 sq ft75 ftVaries25 ft35 ft, 2.5 stories7%21%
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.

Saddle River zoning questions

What are the setbacks in Saddle River, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 125 ft from the street, 40 ft on each side, 50 ft from the rear line.
  • R-2: 75 ft from the street, 15 ft on each side, 25 ft from the rear line.

What is the minimum lot size in Saddle River?

R-1: 2 acres; R-2: 11,250 sq ft.

How tall can a house be in Saddle River?

R-1: 35 ft, 2.5 stories; R-2: 35 ft, 2.5 stories.

How much of my lot can I cover in Saddle River?

R-1: 7% building coverage, 21% lot coverage; R-2: 7% building coverage, 21% lot coverage.

Can you recommend an architect in Saddle River?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Saddle River. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Saddle River and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 15, 2026 from the Borough of Saddle River's Chapter 210, Zoning, Attachment 1, Schedule B: Limiting Schedule (publication July 2020). Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table