NJ Zoning Check

Englewood Cliffs zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Englewood Cliffs' R-A, R-B or R-B1 District and see, line by line, whether a house, addition or detached garage meets the Borough's lot, yard, height, coverage and living area limits. The check is free.

Covers the Borough of Englewood Cliffs' single-family zones R-A, R-B and R-B1, Bergen County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 15, 2026 against the Borough's Schedule of Regulations.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Englewood Cliffs

Englewood Cliffs has 3 single-family zones covered here: R-A, R-B and R-B1. Minimum lot sizes run from 5,000 sq ft (R-B1) to 10,000 sq ft (R-A). A house must sit 20 ft (R-B1) to 30 ft (R-A) back from the street and 20 ft (R-B1) to 25 ft (R-A) from the rear lot line. Houses can be up to 30 ft tall. Up to 51% of the lot may be covered.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
20 to 30 ft
From each side
5 to 10 ft in most zones
From the back
20 to 25 ft
Height
30 ft
See the limits for every zone
ZoneFrontEach sideRearHeightEverything built on the lotEverything paved or built
R-ALots of 10,000 sq ft30 ftVaries25 ft30 ft, 2.5 storiesVaries51%
R-BLots of 7,000 sq ft25 ftVaries25 ft30 ft, 2.5 storiesVaries51%
R-B1Lots of 5,000 sq ft20 ft5 ft, 13 ft total20 ft30 ft, 2.5 storiesVaries51%
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.

Englewood Cliffs zoning questions

What are the setbacks in Englewood Cliffs, NJ?

For a single-family house. Corner lots can differ.

  • R-A: 30 ft from the street, 10 ft on each side, 25 ft from the rear line.
  • R-B: 25 ft from the street, 7 ft on each side, 25 ft from the rear line.
  • R-B1: 20 ft from the street, 5 ft on each side (13 ft in total), 20 ft from the rear line.

What is the minimum lot size in Englewood Cliffs?

R-A: 10,000 sq ft; R-B: 7,000 sq ft; R-B1: 5,000 sq ft.

How tall can a house be in Englewood Cliffs?

R-A: 30 ft, 2.5 stories; R-B: 30 ft, 2.5 stories; R-B1: 30 ft, 2.5 stories.

How much of my lot can I cover in Englewood Cliffs?

R-A: 51% lot coverage; R-B: 51% lot coverage; R-B1: 51% lot coverage.

Can you recommend an architect in Englewood Cliffs?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Englewood Cliffs. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Englewood Cliffs and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 15, 2026 from the Borough of Englewood Cliffs' Chapter 30, Zoning, Attachment 1, Schedule A: Schedule of Regulations and Table I (Supp 5, March 2026), and Section 30-7.2. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table