NJ Zoning Check

Allendale zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Allendale's AAA, AA, A or B zone and see, line by line, whether a house or addition meets the Borough's lot, yard, height, coverage and floor area limits.

Covers the Borough of Allendale's single-family zones AAA, AA, A and B, Bergen County. Checks a new house, an addition or an attached garage.

Numbers last checked November 9, 2026 against the Borough's code.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Allendale

Allendale has 4 single-family zones covered here: AAA, AA, A and B. Minimum lot sizes run from 10,000 sq ft (B) to 40,000 sq ft (AAA). A house must sit 30 ft (B) to 50 ft (AAA) back from the street and 25 ft (B) to 50 ft (AAA) from the rear lot line. Houses can be up to 35 ft tall.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
30 to 50 ft
From each side
10 to 25 ft
From the back
25 to 50 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightEverything paved or built
AAALots of 40,000 sq ft50 ft25 ft50 ft35 ft, 2.5 storiesVaries
AALots of 26,000 sq ft40 ft20 ft50 ft35 ft, 2.5 storiesVaries
ALots of 20,000 sq ft35 ft15 ft50 ft35 ft, 2.5 storiesVaries
BLots of 10,000 sq ft30 ft10 ft25 ft35 ft, 2.5 storiesVaries
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 9, 2026. Confirm with the town before you design or buy.

Allendale zoning questions

What are the setbacks in Allendale, NJ?

For a single-family house. Corner lots can differ.

  • AAA: 50 ft from the street, 25 ft on each side, 50 ft from the rear line.
  • AA: 40 ft from the street, 20 ft on each side, 50 ft from the rear line.
  • A: 35 ft from the street, 15 ft on each side, 50 ft from the rear line.
  • B: 30 ft from the street, 10 ft on each side, 25 ft from the rear line.

What is the minimum lot size in Allendale?

AAA: 40,000 sq ft; AA: 26,000 sq ft; A: 20,000 sq ft; B: 10,000 sq ft.

How tall can a house be in Allendale?

AAA: 35 ft, 2.5 stories; AA: 35 ft, 2.5 stories; A: 35 ft, 2.5 stories; B: 35 ft, 2.5 stories.

Can you recommend an architect in Allendale?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Allendale. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Allendale and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 9, 2026 from the Borough's Chapter 270, Sections 270-51, 270-54, 270-57, 270-60 and 270-62 to 270-64. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table