NJ Zoning Check

Fairview zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot in Fairview's R-A, R-B or R-C District and see, line by line, whether a one- or two-family house, addition or detached garage meets the Borough's lot, yard, height, coverage and floor area limits. The check is free.

Covers the Borough of Fairview's single-family zones R-1F and R-2F, Bergen County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 15, 2026 against the Borough's Schedule XI-2, Area and Bulk Regulations.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Fairview

Fairview has 2 single-family zones covered here: R-1F and R-2F. Minimum lot sizes run from 3,750 sq ft (R-1F) to 5,000 sq ft (R-2F). A house must sit 20 ft back from the street and 20 ft from the rear lot line. Houses can be up to 30 ft tall. Buildings may cover up to 40% of the lot.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
20 ft
From each side
3 to 5 ft
From the back
20 ft
Height
30 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings togetherEverything paved or built
R-1FLots of 3,750 sq ft20 ft3 ft20 ft30 ft, 2.5 stories40%—
R-2FLots of 5,000 sq ft20 ft5 ft20 ft30 ft40%65%
  • A dash means this check has no limit for that item.
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.

Fairview zoning questions

What are the setbacks in Fairview, NJ?

For a single-family house. Corner lots can differ.

  • R-1F: 20 ft from the street, 3 ft on each side, 20 ft from the rear line.
  • R-2F: 20 ft from the street, 5 ft on each side, 20 ft from the rear line.

What is the minimum lot size in Fairview?

R-1F: 3,750 sq ft; R-2F: 5,000 sq ft.

How tall can a house be in Fairview?

R-1F: 30 ft, 2.5 stories; R-2F: 30 ft.

How much of my lot can I cover in Fairview?

R-1F: 40% building coverage; R-2F: 40% building coverage, 65% lot coverage.

Can you recommend an architect in Fairview?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Fairview. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Fairview and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 15, 2026 from the Borough of Fairview's Chapter 25, Land Use and Development Regulations, Attachment 4, Appendix D, Schedule XI-2, and Sections 25-1302 and 25-1402.1 (code current through June 16, 2026). Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table