NJ Zoning Check

Ramsey zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Ramsey's R-1, R-2 or R-3 district and see, line by line, whether a house or addition meets the Borough's lot, yard, height, coverage and living space limits.

Covers the Borough of Ramsey's single-family zones R-1, R-2 and R-3, Bergen County. Checks a new house, an addition or an attached garage.

Numbers last checked November 9, 2026 against the Borough's code.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Ramsey

Ramsey has 3 single-family zones covered here: R-1, R-2 and R-3. Minimum lot sizes run from 14,000 sq ft (R-3) to 40,250 sq ft (R-1). A house must sit 40 ft (R-3) to 50 ft (R-1) back from the street and 25 ft (R-3) to 50 ft (R-1) from the rear lot line. Houses can be up to 35 ft tall. Building coverage limits run from 12% (R-1) to 15% (R-2) in R-1 and R-2; in R-3 it depends on the lot.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
40 to 50 ft
From each side
10 to 25 ft
From the back
25 to 50 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings togetherEverything paved or built
R-1Lots of 40,250 sq ft50 ft25 ft50 ft35 ft, 2.5 stories12%30%
R-2Lots of 25,000 sq ft50 ft15 ft50 ft35 ft, 2.5 stories15%30%
R-3Lots of 14,000 sq ft40 ft10 ft25 ft35 ft, 2.5 storiesVariesVaries
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 9, 2026. Confirm with the town before you design or buy.

Ramsey zoning questions

What are the setbacks in Ramsey, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 50 ft from the street, 25 ft on each side, 50 ft from the rear line.
  • R-2: 50 ft from the street, 15 ft on each side, 50 ft from the rear line.
  • R-3: 40 ft from the street, 10 ft on each side, 25 ft from the rear line.

What is the minimum lot size in Ramsey?

R-1: 40,250 sq ft; R-2: 25,000 sq ft; R-3: 14,000 sq ft.

How tall can a house be in Ramsey?

R-1: 35 ft, 2.5 stories; R-2: 35 ft, 2.5 stories; R-3: 35 ft, 2.5 stories.

How much of my lot can I cover in Ramsey?

R-1: 12% building coverage, 30% lot coverage; R-2: 15% building coverage, 30% lot coverage. In the other zones it depends on the lot.

Can you recommend an architect in Ramsey?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Ramsey. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Ramsey and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 9, 2026 from the Borough's Chapter 34, Sections 34-13.2, 34-14.2 and 34-15.2. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table