NJ Zoning Check

Glen Rock zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Glen Rock's A-1 or A-2 district and see, line by line, whether a house or addition meets the Borough's lot, yard, height, coverage and floor area limits.

Covers the Borough of Glen Rock's single-family zones A-1 and A-2, Bergen County. Checks a new house, an addition or an attached garage.

Numbers last checked November 9, 2026 against the Borough's code.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Glen Rock

Glen Rock has 2 single-family zones covered here: A-1 and A-2. Minimum lot sizes run from 11,200 sq ft (A-2) to 17,500 sq ft (A-1). A house must sit 50 ft back from the street and 30 ft (A-2) to 50 ft (A-1) from the rear lot line. Houses can be up to 32 ft tall. Buildings may cover up to 25% of the lot.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
50 ft
From each side
Depends on your lot
From the back
30 to 50 ft
Height
32 ft
See the limits for every zone
ZoneFrontEach sideRearHeightStructure coverage
A-1Lots of 17,500 sq ft50 ftVaries50 ft32 ft25%
A-2Lots of 11,200 sq ft50 ftVaries30 ft32 ft25%
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 9, 2026. Confirm with the town before you design or buy.

Glen Rock zoning questions

What are the setbacks in Glen Rock, NJ?

For a single-family house. Corner lots can differ.

  • A-1: 50 ft from the street, 50 ft from the rear line.
  • A-2: 50 ft from the street, 30 ft from the rear line.

What is the minimum lot size in Glen Rock?

A-1: 17,500 sq ft; A-2: 11,200 sq ft.

How tall can a house be in Glen Rock?

A-1: 32 ft; A-2: 32 ft.

How much of my lot can I cover in Glen Rock?

A-1: 25% building coverage; A-2: 25% building coverage.

Can you recommend an architect in Glen Rock?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Glen Rock. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Glen Rock and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 9, 2026 from the Borough's Chapter 230, Sections 230-51 and 230-54. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table