NJ Zoning Check

Cliffside Park zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a one-family lot in Cliffside Park's R-1 or R-2 Zone and see, line by line, whether a house, addition or detached garage meets the Borough's lot, yard, height, coverage and floor area limits. The check is free.

Covers the Borough of Cliffside Park's single-family zones R-1 and R-2, Bergen County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 15, 2026 against the Borough's zoning chapter.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Cliffside Park

Cliffside Park has 2 single-family zones covered here: R-1 and R-2. Each needs a lot of at least 5,000 sq ft. A house must sit 25 ft back from the street and 25 ft from the rear lot line. Buildings may cover up to 40% of the lot.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
25 ft
From each side
6 ft
From the back
25 ft
Height
Depends on your lot
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings together
R-1Lots of 5,000 sq ft25 ft6 ft25 ftVaries40%
R-2Lots of 5,000 sq ft25 ft6 ft25 ftVaries40%
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.

Cliffside Park zoning questions

What are the setbacks in Cliffside Park, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 25 ft from the street, 6 ft on each side, 25 ft from the rear line.
  • R-2: 25 ft from the street, 6 ft on each side, 25 ft from the rear line.

What is the minimum lot size in Cliffside Park?

R-1: 5,000 sq ft; R-2: 5,000 sq ft.

How much of my lot can I cover in Cliffside Park?

R-1: 40% building coverage; R-2: 40% building coverage.

Can you recommend an architect in Cliffside Park?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Cliffside Park. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Cliffside Park and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 15, 2026 from the Borough of Cliffside Park's Chapter 18, Zoning, Sections 18-3.1, 18-3.2, 18-6.2, 18-6.4 and 18-6.8. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table