NJ Zoning Check

Hillsdale zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a one-family lot in Hillsdale's R-1, R-2, R-3 or R-4 District and see, line by line, whether a house or addition meets the Borough's lot, yard, height, coverage and floor area limits. The check is free.

Covers the Borough of Hillsdale's single-family zones R-1, R-2, R-3 and R-4, Bergen County. Checks a new house, an addition or an attached garage.

Numbers last checked November 15, 2026 against the Borough's Schedule of Uses and Requirements.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Hillsdale

Hillsdale has 4 single-family zones covered here: R-1, R-2, R-3 and R-4. Minimum lot sizes run from 7,500 sq ft (R-4) to 22,500 sq ft (R-1). A house must sit 30 ft (R-3) to 60 ft (R-1) back from the street and 25 ft (R-3) to 50 ft (R-1) from the rear lot line. Height limits run from 33 ft (R-4) to 35 ft (R-1). Building coverage limits run from 20% (R-1) to 25% (R-3).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
30 to 60 ft
From each side
10 to 25 ft
From the back
25 to 50 ft
Height
33 to 35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings togetherEverything paved or built
R-1Lots of 22,500 sq ft60 ftVaries50 ft35 ft20%30%
R-2Lots of 15,000 sq ft50 ftVaries50 ft35 ft20%30%
R-3Lots of 10,000 sq ft30 ftVaries25 ft35 ft25%30%
R-4Lots of 7,500 sq ft30 ftVaries25 ft33 ft25%30%
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.

Hillsdale zoning questions

What are the setbacks in Hillsdale, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 60 ft from the street, 25 ft on each side, 50 ft from the rear line.
  • R-2: 50 ft from the street, 10 ft on each side, 50 ft from the rear line.
  • R-3: 30 ft from the street, 10 ft on each side, 25 ft from the rear line.
  • R-4: 30 ft from the street, 10 ft on each side, 25 ft from the rear line.

What is the minimum lot size in Hillsdale?

R-1: 22,500 sq ft; R-2: 15,000 sq ft; R-3: 10,000 sq ft; R-4: 7,500 sq ft.

How tall can a house be in Hillsdale?

R-1: 35 ft; R-2: 35 ft; R-3: 35 ft; R-4: 33 ft.

How much of my lot can I cover in Hillsdale?

R-1: 20% building coverage, 30% lot coverage; R-2: 20% building coverage, 30% lot coverage; R-3: 25% building coverage, 30% lot coverage; R-4: 25% building coverage, 30% lot coverage.

Can you recommend an architect in Hillsdale?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Hillsdale. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Hillsdale and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 15, 2026 from the Borough of Hillsdale's Chapter 310, Land Use, Attachment 1, Schedule of Uses and Requirements (publication May 2020), and Section 310-53A (Ord. No. 18-09). Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table