NJ Zoning Check

Oradell zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Oradell's R-1, R-2 or R-3 zone and see, line by line, whether a house or addition meets the Borough's lot, yard, height, coverage and floor area limits.

Covers the Borough of Oradell's single-family zones R-1, R-2 and R-3, Bergen County. Checks a new house, an addition or an attached garage.

Numbers last checked November 9, 2026 against the Borough's code.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Oradell

Oradell has 3 single-family zones covered here: R-1, R-2 and R-3. Minimum lot sizes run from 9,000 sq ft (R-3) to 18,750 sq ft (R-1). Houses can be up to 32 ft tall. Buildings may cover up to 25% of the lot.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
25 to 35 ft
From each side
10 to 20 ft
From the back
Depends on your lot
Height
32 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings togetherEverything built on the lot
R-1Lots of 18,750 sq ft35 ftVariesVaries32 ft25%40%
R-2Lots of 12,000 sq ft30 ftVariesVaries32 ft25%40%
R-3Lots of 9,000 sq ft25 ftVariesVaries32 ft25%40%
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 9, 2026. Confirm with the town before you design or buy.

Oradell zoning questions

What are the setbacks in Oradell, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 35 ft from the street, 20 ft on each side.
  • R-2: 30 ft from the street, 15 ft on each side.
  • R-3: 25 ft from the street, 10 ft on each side.

What is the minimum lot size in Oradell?

R-1: 18,750 sq ft; R-2: 12,000 sq ft; R-3: 9,000 sq ft.

How tall can a house be in Oradell?

R-1: 32 ft; R-2: 32 ft; R-3: 32 ft.

How much of my lot can I cover in Oradell?

R-1: 25% building coverage, 40% lot coverage; R-2: 25% building coverage, 40% lot coverage; R-3: 25% building coverage, 40% lot coverage.

Can you recommend an architect in Oradell?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Oradell. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Oradell and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 9, 2026 from the Borough's Chapter 240, Sections 240-6.5 and 240-6.11. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table