NJ Zoning Check

Carlstadt zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a house in Carlstadt's Residential zone and see, line by line, whether a new house or addition meets the Borough's plot, yard, height, coverage and floor area limits.

Covers the Borough of Carlstadt's single-family zones R-1C, R-1N and R-2F, Bergen County. Checks a new house, an addition or an attached garage.

Numbers last checked November 16, 2026 against the Borough's Schedule Limiting Height and Bulk of Buildings (amended March 25, 2026).

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Carlstadt

Carlstadt has 3 single-family zones covered here: R-1C, R-1N and R-2F. Minimum lot sizes run from 3,750 sq ft (R-1C) to 7,500 sq ft (R-2F). Height limits run from 27 ft (R-1N) to 32 ft (R-1C). Building coverage limits run from 30% (R-2F) to 40% (R-1C).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From each side
5 to 7 ft
From the back
30 ft
Height
27 to 32 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings together
R-1CLots of 3,750 sq ft—5 ft, 12 ft total30 ft32 ft, 2.5 stories40%
R-1NLots of 5,000 sq ft—5 ft, 12 ft total30 ft27 ft, 2.5 stories40%
R-2FLots of 7,500 sq ft—7 ft, 21 ft total30 ft27 ft, 2.5 stories30%
  • A dash means this check has no limit for that item.
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Carlstadt zoning questions

What are the setbacks in Carlstadt, NJ?

For a single-family house. Corner lots can differ.

  • R-1C: 5 ft on each side (12 ft in total), 30 ft from the rear line.
  • R-1N: 5 ft on each side (12 ft in total), 30 ft from the rear line.
  • R-2F: 7 ft on each side (21 ft in total), 30 ft from the rear line.

What is the minimum lot size in Carlstadt?

R-1C: 3,750 sq ft; R-1N: 5,000 sq ft; R-2F: 7,500 sq ft.

How tall can a house be in Carlstadt?

R-1C: 32 ft, 2.5 stories; R-1N: 27 ft, 2.5 stories; R-2F: 27 ft, 2.5 stories.

How much of my lot can I cover in Carlstadt?

R-1C: 40% building coverage; R-1N: 40% building coverage; R-2F: 30% building coverage.

Can you recommend an architect in Carlstadt?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Carlstadt. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Carlstadt and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the Borough of Carlstadt's Chapter XXI, Attachment 1, Schedule Limiting Height and Bulk of Buildings, as amended March 25, 2026 by Ord. No. 25-17. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table