NJ Zoning Check

Stratford zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a single-family house in Stratford's R-1 district and see, line by line, whether a house, addition, shed or detached garage meets the Borough's lot, yard, coverage and floor area limits.

Covers the Borough of Stratford's single-family zone R-1, Camden County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 16, 2026 against the Borough's Title 17, Schedule I (Section 17.48.030).

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Stratford

Stratford has one single-family zone covered here, R-1. Each needs a lot of at least 8,250 sq ft. A house must sit 35 ft back from the street and 15 ft from the rear lot line. Buildings may cover up to 30% of the lot.

New house or addition

Your address will show your exact numbers.

From the street
35 ft
From each side
10 ft
From the back
15 ft
See the limits for the R-1 zone
ZoneFrontEach sideRearHeightOccupied area
R-1Lots of 8,250 sq ft35 ft10 ft, 25 ft total15 ft—30%
  • A dash means this check has no limit for that item.
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Stratford zoning questions

What are the setbacks in Stratford, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 35 ft from the street, 10 ft on each side (25 ft in total), 15 ft from the rear line.

What is the minimum lot size in Stratford?

R-1: 8,250 sq ft.

How much of my lot can I cover in Stratford?

R-1: 30% building coverage.

Can you recommend an architect in Stratford?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Stratford. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Stratford and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the Borough of Stratford's Title 17, Section 17.48.030, Schedule I. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table