NJ Zoning Check

Bellmawr zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Bellmawr's Residence District A and see, line by line, whether a house or addition meets the Borough's lot, yard, height and coverage limits.

Covers the Borough of Bellmawr's single-family zone A, Camden County. Checks a new house, an addition or an attached garage.

Numbers last checked November 4, 2026 against the Borough's online code.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Bellmawr

Bellmawr has one single-family zone covered here, A. Each needs a lot of at least 6,000 sq ft. A house must sit 25 ft back from the street and 30 ft from the rear lot line. Houses can be up to 35 ft tall. Buildings may cover up to 30% of the lot.

New house or addition

Your address will show your exact numbers.

From the street
25 ft
From each side
5 ft
From the back
30 ft
Height
35 ft
See the limits for the A zone
ZoneFrontEach sideRearHeightEverything built on the lot
ALots of 6,000 sq ft25 ft5 ft, 15 ft total30 ft35 ft30%
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 4, 2026. Confirm with the town before you design or buy.

Bellmawr zoning questions

What are the setbacks in Bellmawr, NJ?

For a single-family house. Corner lots can differ.

  • A: 25 ft from the street, 5 ft on each side (15 ft in total), 30 ft from the rear line.

What is the minimum lot size in Bellmawr?

A: 6,000 sq ft.

How tall can a house be in Bellmawr?

A: 35 ft.

How much of my lot can I cover in Bellmawr?

A: 30% building coverage.

Can you recommend an architect in Bellmawr?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Bellmawr. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Bellmawr and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 4, 2026 from the Borough's Chapter 260, Section 260-15, Lot and bulk regulations. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table