NJ Zoning Check

Camden zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a single-family house in Camden's R-1, R-2 or R-3 zone and see, line by line, whether a new house or addition meets the City's lot, yard, height and coverage limits.

Covers the City of Camden's single-family zones R-1, R-2 and R-3, Camden County. Checks a new house, an addition or an attached garage.

Numbers last checked November 16, 2026 against the City's Chapter 870, Tables 1 to 3.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Camden

Camden has 3 single-family zones covered here: R-1, R-2 and R-3. Minimum lot sizes run from 2,000 sq ft (R-3) to 3,000 sq ft (R-1). A house must sit 10 ft back from the street and 10 ft (R-3) to 20 ft (R-1) from the rear lot line. Houses can be up to 35 ft tall. Building coverage limits run from 40% (R-1) to 60% (R-3).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
10 ft
From each side
10 ft
From the back
10 to 20 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings togetherEverything paved or built
R-1Lots of 3,000 sq ft10 ft10 ft, 25 ft total20 ft35 ft, 3 stories40%60%
R-2Lots of 3,000 sq ft10 ft10 ft, 25 ft total20 ft35 ft, 3 stories40%60%
R-3Lots of 2,000 sq ft10 ft10 ft, 25 ft total10 ft35 ft, 3 stories60%80%
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Camden zoning questions

What are the setbacks in Camden, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 10 ft from the street, 10 ft on each side (25 ft in total), 20 ft from the rear line.
  • R-2: 10 ft from the street, 10 ft on each side (25 ft in total), 20 ft from the rear line.
  • R-3: 10 ft from the street, 10 ft on each side (25 ft in total), 10 ft from the rear line.

What is the minimum lot size in Camden?

R-1: 3,000 sq ft; R-2: 3,000 sq ft; R-3: 2,000 sq ft.

How tall can a house be in Camden?

R-1: 35 ft, 3 stories; R-2: 35 ft, 3 stories; R-3: 35 ft, 3 stories.

How much of my lot can I cover in Camden?

R-1: 40% building coverage, 60% lot coverage; R-2: 40% building coverage, 60% lot coverage; R-3: 60% building coverage, 80% lot coverage.

Can you recommend an architect in Camden?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Camden. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Camden and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the City of Camden's Chapter 870, Zoning and Land Use, Sections 870-51, 870-56 and 870-61. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table