NJ Zoning Check

Laurel Springs zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a one-family house in Laurel Springs' R-1 Residential Zone and see, line by line, whether a house, addition, shed or detached garage meets the Borough's lot, yard, height and coverage limits.

Covers the Borough of Laurel Springs' single-family zone R-1, Camden County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 16, 2026 against the Borough's Chapter 270, Section 270-24.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Laurel Springs

Laurel Springs has one single-family zone covered here, R-1. Each needs a lot of at least 9,000 sq ft. A house must sit 25 ft back from the street and 25 ft from the rear lot line. Houses can be up to 35 ft tall. Up to 50% of the lot may be covered.

New house or addition

Your address will show your exact numbers.

From the street
25 ft
From each side
10 ft
From the back
25 ft
Height
35 ft
See the limits for the R-1 zone
ZoneFrontEach sideRearHeightEverything built on the lot
R-1Lots of 9,000 sq ft25 ft10 ft25 ft35 ft, 2.5 stories50%
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Laurel Springs zoning questions

What are the setbacks in Laurel Springs, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 25 ft from the street, 10 ft on each side, 25 ft from the rear line.

What is the minimum lot size in Laurel Springs?

R-1: 9,000 sq ft.

How tall can a house be in Laurel Springs?

R-1: 35 ft, 2.5 stories.

How much of my lot can I cover in Laurel Springs?

R-1: 50% lot coverage.

Can you recommend an architect in Laurel Springs?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Laurel Springs. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Laurel Springs and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the Borough of Laurel Springs' Chapter 270, Zoning, Section 270-24. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table