NJ Zoning Check

Berlin Township zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a single-family house in Berlin Township's R-1 or R-2 zone (including West Berlin) and see, line by line, whether a house, addition, detached garage or shed meets the Township's lot, yard, height and coverage limits.

Covers the Township of Berlin's single-family zones R-1 and R-2, Camden County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 16, 2026 against the Township's Chapter 340, Attachment 1 and Section 340-19.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Berlin Township

Berlin Township has 2 single-family zones covered here: R-1 and R-2. Each needs a lot of at least 9,375 sq ft in most zones. A house must sit 30 ft back from the street and 25 ft from the rear lot line in most zones. Houses can be up to 35 ft tall. Building coverage limits run from 20% (R-1) to 50% (R-2).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
30 ft in most zones
From each side
15 ft
From the back
25 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings together
R-1Varies15 ft25 ft35 ft, 2.5 stories20%
R-2Lots of 9,375 sq ft30 ft15 ft25 ft35 ft, 2.5 stories50%
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Berlin Township zoning questions

What are the setbacks in Berlin Township, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 15 ft on each side, 25 ft from the rear line.
  • R-2: 30 ft from the street, 15 ft on each side, 25 ft from the rear line.

What is the minimum lot size in Berlin Township?

R-2: 9,375 sq ft. In the other zones it depends on the lot.

How tall can a house be in Berlin Township?

R-1: 35 ft, 2.5 stories; R-2: 35 ft, 2.5 stories.

How much of my lot can I cover in Berlin Township?

R-1: 20% building coverage; R-2: 50% building coverage.

Can you recommend an architect in Berlin Township?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Berlin Township. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Berlin Township and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the Township of Berlin's Chapter 340, Attachment 1 (Schedule of Area, Yard and Bulk Requirements, through Ord. No. 2024-15) and Section 340-19. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table