NJ Zoning Check

Pennsauken zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Pennsauken's R-1, R-2 or R-3 district and see, line by line, whether a house or addition meets the Township's lot, yard, height and coverage limits.

Covers the Township of Pennsauken's single-family zones R-1, R-2 and R-3, Camden County. Checks a new house, an addition or an attached garage.

Numbers last checked November 9, 2026 against the Township's code.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Pennsauken

Pennsauken has 3 single-family zones covered here: R-1, R-2 and R-3. Minimum lot sizes run from 5,000 sq ft (R-3) to 9,000 sq ft (R-1). A house must sit 25 ft (R-3) to 35 ft (R-1) back from the street and 30 ft (R-3) to 40 ft (R-1) from the rear lot line. Houses can be up to 35 ft tall. Building coverage limits run from 30% (R-2) to 35% (R-1).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
25 to 35 ft
From each side
6 to 10 ft
From the back
30 to 40 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings togetherEverything paved or built
R-1Lots of 9,000 sq ft35 ft10 ft, 30 ft total40 ft35 ft, 2.5 stories35%60%
R-2Lots of 6,000 sq ft30 ft8 ft, 25 ft total35 ft35 ft, 2.5 stories30%65%
R-3Lots of 5,000 sq ft25 ft6 ft, 18 ft total30 ft35 ft, 2.5 stories35%70%
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 9, 2026. Confirm with the town before you design or buy.

Pennsauken zoning questions

What are the setbacks in Pennsauken, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 35 ft from the street, 10 ft on each side (30 ft in total), 40 ft from the rear line.
  • R-2: 30 ft from the street, 8 ft on each side (25 ft in total), 35 ft from the rear line.
  • R-3: 25 ft from the street, 6 ft on each side (18 ft in total), 30 ft from the rear line.

What is the minimum lot size in Pennsauken?

R-1: 9,000 sq ft; R-2: 6,000 sq ft; R-3: 5,000 sq ft.

How tall can a house be in Pennsauken?

R-1: 35 ft, 2.5 stories; R-2: 35 ft, 2.5 stories; R-3: 35 ft, 2.5 stories.

How much of my lot can I cover in Pennsauken?

R-1: 35% building coverage, 60% lot coverage; R-2: 30% building coverage, 65% lot coverage; R-3: 35% building coverage, 70% lot coverage.

Can you recommend an architect in Pennsauken?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Pennsauken. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Pennsauken and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 9, 2026 from the Township's Chapter 141, Sections 141-76, 141-77 and 141-78. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table