NJ Zoning Check

Chesilhurst zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a single-family house in Chesilhurst's R-1, R-2 or R-3 district and see, line by line, whether a house, addition or shed meets the Borough's lot, yard, height and floor area limits.

Covers the Borough of Chesilhurst's single-family zones R-1, R-1-PDC, R-2, R-2-PDC and R-3, Camden County. Checks a new house, an addition, an attached garage or a shed.

Numbers last checked November 16, 2026 against the Borough's Chapter 285, Article XIII.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Chesilhurst

Chesilhurst has 5 single-family zones covered here: R-1, R-1-PDC, R-2, R-2-PDC and R-3. A house must sit 30 ft (R-2-PDC) to 50 ft (R-1) back from the street and 40 ft (R-3) to 50 ft (R-1) from the rear lot line. Height limits run from 35 ft (R-1) to 40 ft (R-2-PDC).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
30 to 50 ft
From each side
12 to 20 ft
From the back
40 to 50 ft
Height
35 to 40 ft
See the limits for every zone
ZoneFrontEach sideRearHeight
R-150 ft20 ft50 ft35 ft
R-1-PDC40 ft15 ft50 ft35 ft
R-240 ft15 ft50 ft35 ft
R-2-PDC30 ft12 ft50 ft40 ft
R-330 ft12 ft, 30 ft total40 ft35 ft

Sheds have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Chesilhurst zoning questions

What are the setbacks in Chesilhurst, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 50 ft from the street, 20 ft on each side, 50 ft from the rear line.
  • R-1-PDC: 40 ft from the street, 15 ft on each side, 50 ft from the rear line.
  • R-2: 40 ft from the street, 15 ft on each side, 50 ft from the rear line.
  • R-2-PDC: 30 ft from the street, 12 ft on each side, 50 ft from the rear line.
  • R-3: 30 ft from the street, 12 ft on each side (30 ft in total), 40 ft from the rear line.

How tall can a house be in Chesilhurst?

R-1: 35 ft; R-1-PDC: 35 ft; R-2: 35 ft; R-2-PDC: 40 ft; R-3: 35 ft.

Can you recommend an architect in Chesilhurst?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Chesilhurst. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Chesilhurst and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the Borough of Chesilhurst's Chapter 285, Article XIII, Zoning District Regulations. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table