NJ Zoning Check

Haddon Heights zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Haddon Heights' R-1, R-2, R-3 or R-4 zone and see, line by line, whether a house or addition meets the Borough's lot, yard, height and coverage limits.

Covers the Borough of Haddon Heights' single-family zones R-1, R-2, R-3 and R-4, Camden County. Checks a new house, an addition or an attached garage.

Numbers last checked November 9, 2026 against the Borough's code.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Haddon Heights

Haddon Heights has 4 single-family zones covered here: R-1, R-2, R-3 and R-4. Minimum lot sizes run from 7,500 sq ft (R-4) to 12,000 sq ft (R-2) in most zones. A house must sit 30 ft back from the street and 30 ft (R-4) to 50 ft (R-1) from the rear lot line. Houses can be up to 35 ft tall. Buildings may cover up to 30% of the lot.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
30 ft
From each side
8 to 15 ft
From the back
30 to 50 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightEverything built on the lot
R-130 ft15 ft, 35 ft total50 ft35 ft, 2.5 stories30%
R-2Lots of 12,000 sq ft30 ft10 ft, 25 ft total50 ft35 ft, 2.5 stories30%
R-3Lots of 8,700 sq ft30 ft8 ft, 20 ft total40 ft35 ft, 2.5 stories30%
R-4Lots of 7,500 sq ft30 ft10 ft, 25 ft total30 ft35 ft, 2.5 stories30%
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 9, 2026. Confirm with the town before you design or buy.

Haddon Heights zoning questions

What are the setbacks in Haddon Heights, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 30 ft from the street, 15 ft on each side (35 ft in total), 50 ft from the rear line.
  • R-2: 30 ft from the street, 10 ft on each side (25 ft in total), 50 ft from the rear line.
  • R-3: 30 ft from the street, 8 ft on each side (20 ft in total), 40 ft from the rear line.
  • R-4: 30 ft from the street, 10 ft on each side (25 ft in total), 30 ft from the rear line.

What is the minimum lot size in Haddon Heights?

R-2: 12,000 sq ft; R-3: 8,700 sq ft; R-4: 7,500 sq ft. In the other zones it depends on the lot.

How tall can a house be in Haddon Heights?

R-1: 35 ft, 2.5 stories; R-2: 35 ft, 2.5 stories; R-3: 35 ft, 2.5 stories; R-4: 35 ft, 2.5 stories.

How much of my lot can I cover in Haddon Heights?

R-1: 30% building coverage; R-2: 30% building coverage; R-3: 30% building coverage; R-4: 30% building coverage.

Can you recommend an architect in Haddon Heights?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Haddon Heights. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Haddon Heights and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 9, 2026 from the Borough's Chapter 450, Sections 450-24, 450-28, 450-32 and 450-36. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table