Enter your address to find your zone and see if your project fits. No account needed.
About these numbers
Enter a single-family lot in Runnemede's R-1 or R-2 District and see, line by line, whether a house, addition or detached garage meets the Borough's lot, yard, height, coverage and floor area limits. The check is free.
Covers the Borough of Runnemede's single-family zones R-1 and R-2, Camden County. Checks a new house, an addition, an attached garage or a detached garage or shed.
Runnemede has 2 single-family zones covered here: R-1 and R-2. Minimum lot sizes run from 6,000 sq ft (R-1) to 20,000 sq ft (R-2). A house must sit 25 ft (R-1) to 30 ft (R-2) back from the street and 25 ft from the rear lot line. Houses can be up to 30 ft tall. Building coverage limits run from 25% (R-2) to 35% (R-1).
New house or addition
Depends on your zone. Your address will show your exact numbers.
From the street
25 to 30 ft
From each side
7 to 10 ft
From the back
25 ft in most zones
Height
30 ft
See the limits for every zone
Zone
Front
Each side
Rear
Height
Everything built on the lot
R-1Lots of 6,000 sq ft
25 ft
7 ft
25 ft
30 ft, 2.5 stories
35%
R-2Lots of 20,000 sq ft
30 ft
10 ft, 30 ft total
Varies
30 ft, 2.5 stories
25%
Varies means the limit depends on details of your lot. Check your address to see what we can work out.
Coverage is a share of the lot.
Sheds and detached garages have their own rules. Enter your address above to see them.
Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.
Runnemede zoning questions
What are the setbacks in Runnemede, NJ?
For a single-family house. Corner lots can differ.
R-1: 25 ft from the street, 7 ft on each side, 25 ft from the rear line.
R-2: 30 ft from the street, 10 ft on each side (30 ft in total).
What is the minimum lot size in Runnemede?
R-1: 6,000 sq ft; R-2: 20,000 sq ft.
How tall can a house be in Runnemede?
R-1: 30 ft, 2.5 stories; R-2: 30 ft, 2.5 stories.
How much of my lot can I cover in Runnemede?
R-1: 35% building coverage; R-2: 25% building coverage.
Can you recommend an architect in Runnemede?
Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Runnemede. It's free and there's no obligation.
We'll connect you with a vetted, licensed residential architect who works in Runnemede and can turn what your lot allows into drawings for your permit. Free, with no obligation.
Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.
Rules that stand out
Drawn from this town's rules and the other zones on this site. Confirm each one with the zoning officer.
The full table is unlocked on this browser.
Get the full report
The check above shows whether each line complies. The full report gives every requirement for your zone and the complete table, with every line filled in and ready to copy or print onto a drawing sheet. It's a one-time purchase, and one key unlocks every town on this site, for as many projects as you like.
By buying or unlocking the full report you agree to the terms of use.
What this does not check
The R-3 district, the C, GO and SED districts, and cul-de-sac frontage.
The size of one-car garages, R-2's 800 sf minimum foundation for houses over one story.
Fences, pools, flood rules and permitted uses.
Where the numbers come from
Requirements were entered on November 15, 2026 from the Borough of Runnemede's Chapter 395, Zoning, Attachment 1: Schedule of Regulations, and Sections 395-6 and 395-7. Check every requirement against the current code before relying on it.
A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.