NJ Zoning Check

Barrington zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a single-family house in Barrington's R-1, R-2 or R-4 district and see, line by line, whether a house, addition or detached garage meets the Borough's lot, yard, height and coverage limits.

Covers the Borough of Barrington's single-family zones R-1, R-2 and R-4, Camden County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 16, 2026 against the Borough's Chapter 360, Sections 360-16, 360-17 and 360-19.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Barrington

Barrington has 3 single-family zones covered here: R-1, R-2 and R-4. Minimum lot sizes run from 6,000 sq ft (R-4) to 10,000 sq ft (R-1). A house must sit 30 ft back from the street and 25 ft from the rear lot line. Houses can be up to 35 ft tall. Up to 40% of the lot may be covered.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
30 ft
From each side
5 to 10 ft
From the back
25 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightLot improvement coverage
R-1Lots of 10,000 sq ft30 ftVaries25 ft35 ft40%
R-2Lots of 7,200 sq ft30 ft6 ft, 20 ft total25 ft35 ft40%
R-4Lots of 6,000 sq ft30 ft5 ft, 18 ft total25 ft35 ft40%
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Barrington zoning questions

What are the setbacks in Barrington, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 30 ft from the street, 10 ft on each side, 25 ft from the rear line.
  • R-2: 30 ft from the street, 6 ft on each side (20 ft in total), 25 ft from the rear line.
  • R-4: 30 ft from the street, 5 ft on each side (18 ft in total), 25 ft from the rear line.

What is the minimum lot size in Barrington?

R-1: 10,000 sq ft; R-2: 7,200 sq ft; R-4: 6,000 sq ft.

How tall can a house be in Barrington?

R-1: 35 ft; R-2: 35 ft; R-4: 35 ft.

How much of my lot can I cover in Barrington?

R-1: 40% lot coverage; R-2: 40% lot coverage; R-4: 40% lot coverage.

Can you recommend an architect in Barrington?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Barrington. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Barrington and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the Borough of Barrington's Chapter 360, Zoning, Sections 360-16, 360-17 and 360-19. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table