NJ Zoning Check

Morristown zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a detached house in Morristown's R District and see, line by line, whether a house, addition, shed or detached garage meets the Town's width-based lot, yard, height and coverage standards.

Covers the Town of Morristown's single-family zone R, Morris County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 16, 2026 against the Town's Chapter 30, Sections 30-205.6 to 30-205.8.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Morristown

Morristown has one single-family zone covered here, R. Houses can be up to 35 ft tall.

New house or addition

Your address will show your exact numbers.

From each side
Depends on your lot
From the back
20 ft
Height
35 ft
See the limits for the R zone
ZoneFrontEach sideRearHeightAll buildings togetherImproved coverage
R—Varies20 ft35 ft, 3 storiesVariesVaries
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • A dash means this check has no limit for that item.
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Morristown zoning questions

What are the setbacks in Morristown, NJ?

For a single-family house. Corner lots can differ.

  • R: 20 ft from the rear line.

How tall can a house be in Morristown?

R: 35 ft, 3 stories.

Can you recommend an architect in Morristown?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Morristown. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Morristown and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the Town of Morristown's Chapter 30, Land Development Ordinance, Sections 30-205.6, 30-205.7 and 30-205.8. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table