NJ Zoning Check

Jefferson Township zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Jefferson Township's R-40 or R-30 zone (Lake Hopatcong, Oak Ridge, Milton) and see, line by line, whether a house or addition meets the Township's lot, yard, height and coverage limits.

Covers the Township of Jefferson's single-family zones R-40 and R-30, Morris County. Checks a new house, an addition or an attached garage.

Numbers last checked November 9, 2026 against the Township's code.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Jefferson Township

Jefferson Township has 2 single-family zones covered here: R-40 and R-30. A house must sit 50 ft back from the street and 35 ft from the rear lot line. Houses can be up to 35 ft tall.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
50 ft
From each side
10 ft in most zones
From the back
35 ft in most zones
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings togetherEverything built on the lot
R-4050 ftVariesVaries35 ft, 2.5 storiesVariesVaries
R-3050 ftVaries35 ft35 ft, 2.5 storiesVariesVaries
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 9, 2026. Confirm with the town before you design or buy.

Jefferson Township zoning questions

What are the setbacks in Jefferson Township, NJ?

For a single-family house. Corner lots can differ.

  • R-40: 50 ft from the street.
  • R-30: 50 ft from the street, 10 ft on each side, 35 ft from the rear line.

How tall can a house be in Jefferson Township?

R-40: 35 ft, 2.5 stories; R-30: 35 ft, 2.5 stories.

Can you recommend an architect in Jefferson Township?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Jefferson Township. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Jefferson Township and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 9, 2026 from the Township's Chapter 490, Sections 490-10 and 490-11. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table