NJ Zoning Check

Dover zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Dover's R-1 or R-2 district and see, line by line, whether a house or addition meets the Town's lot, yard, height, floor area and coverage limits. The check is free.

Covers the Town of Dover's single-family zones R-1 and R-2, Morris County. Checks a new house, an addition or an attached garage.

Numbers last checked November 15, 2026 against the Town's online code.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Dover

Dover has 2 single-family zones covered here: R-1 and R-2. Minimum lot sizes run from 5,000 sq ft (R-2) to 7,500 sq ft (R-1). A house must sit 20 ft back from the street and 30 ft from the rear lot line. Houses can be up to 30 ft tall. Buildings may cover up to 25% of the lot.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
20 ft
From each side
7 to 10 ft
From the back
30 ft
Height
30 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings togetherEverything built on the lot
R-1Lots of 7,500 sq ft20 ft10 ft, 25 ft total30 ft30 ft, 2.5 stories25%Varies
R-2Lots of 5,000 sq ft20 ft10 ft and 7 ft30 ft30 ft, 2.5 stories25%Varies
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.

Dover zoning questions

What are the setbacks in Dover, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 20 ft from the street, 10 ft on each side (25 ft in total), 30 ft from the rear line.
  • R-2: 20 ft from the street, 10 ft on one side and 7 ft on the other, 30 ft from the rear line.

What is the minimum lot size in Dover?

R-1: 7,500 sq ft; R-2: 5,000 sq ft.

How tall can a house be in Dover?

R-1: 30 ft, 2.5 stories; R-2: 30 ft, 2.5 stories.

How much of my lot can I cover in Dover?

R-1: 25% building coverage; R-2: 25% building coverage.

Can you recommend an architect in Dover?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Dover. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Dover and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 15, 2026 from the Town of Dover's Chapter 236, Land Use and Development, Section 236-13, R-1 and R-2 Single-Family Districts. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table