NJ Zoning Check

Harding zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Harding's R-1, R-2, R-3 or R-4 zone and see, line by line, whether a house, addition or detached garage meets the Township's lot, yard, height and building area limits. The check is free.

Covers the Township of Harding's single-family zones R-1, R-2, R-3 and R-4, Morris County. Checks a new house, an addition, an attached garage or a detached garage or barn.

Numbers last checked November 15, 2026 against the Township's online code.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Harding

Harding has 4 single-family zones covered here: R-1, R-2, R-3 and R-4. Minimum lot sizes run from 9,000 sq ft (R-4) to 3 acres (R-1). A house must sit 25 ft (R-4) to 100 ft (R-1) back from the street and 100 ft from the rear lot line. Houses can be up to 35 ft tall. Up to 10% of the lot may be covered in the zones that set one (R-1).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
25 to 100 ft
From each side
4 to 100 ft
From the back
Depends on your lot
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightBuilding areaEverything built on the lot
R-1Lots of 3 acres100 ft100 ft100 ft35 ft, 2.5 storiesVaries10%
R-2Lots of 30,000 sq ft50 ft20 ftVaries35 ft, 2.5 storiesVaries—
R-3Lots of 15,000 sq ft35 ft10 ftVaries35 ft, 2.5 storiesVaries—
R-4Lots of 9,000 sq ft25 ft4 ftVaries35 ft, 2.5 storiesVaries—
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • A dash means this check has no limit for that item.
  • Coverage is a share of the lot.

Detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.

Harding zoning questions

What are the setbacks in Harding, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 100 ft from the street, 100 ft on each side, 100 ft from the rear line.
  • R-2: 50 ft from the street, 20 ft on each side.
  • R-3: 35 ft from the street, 10 ft on each side.
  • R-4: 25 ft from the street, 4 ft on each side.

What is the minimum lot size in Harding?

R-1: 3 acres; R-2: 30,000 sq ft; R-3: 15,000 sq ft; R-4: 9,000 sq ft.

How tall can a house be in Harding?

R-1: 35 ft, 2.5 stories; R-2: 35 ft, 2.5 stories; R-3: 35 ft, 2.5 stories; R-4: 35 ft, 2.5 stories.

How much of my lot can I cover in Harding?

R-1: 10% lot coverage. In the other zones it depends on the lot.

Can you recommend an architect in Harding?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Harding. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Harding and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 15, 2026 from the Township of Harding's Chapter 225, Part 3, Zoning: Section 225-122 (R-1, as amended through Ordinance 09-2022), Section 225-126 (R-2), Section 225-130 (R-3) and Section 225-134 (R-4). Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table