NJ Zoning Check

Hanover zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in one of Hanover Township's single-family districts and see, line by line, whether a house or addition meets the Township's lot, yard, height, floor area and coverage limits. The check is free.

Covers the Township of Hanover's single-family zones R-40, R-40N, R-30, R-25N, R-25, R-21, R-15 and R-10, Morris County. Checks a new house, an addition or an attached garage.

Numbers last checked November 15, 2026 against the Township's online code.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Hanover

Hanover has 8 single-family zones covered here: R-40, R-40N, R-30, R-25N, R-25, R-21, R-15 and R-10. Minimum lot sizes run from 10,500 sq ft (R-10) to 40,500 sq ft (R-40). A house must sit 30 ft (R-25N) to 75 ft (R-40) back from the street and 40 ft (R-15) to 50 ft (R-40) from the rear lot line. Houses can be up to 35 ft tall.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
30 to 75 ft
From each side
10 to 20 ft
From the back
40 to 50 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings togetherImprovement coverage
R-40Lots of 40,500 sq ft75 ft20 ft50 ft35 ft, 2.5 storiesVariesVaries
R-40NLots of 40,500 sq ft75 ft15 ft50 ft35 ft, 2.5 storiesVariesVaries
R-30Lots of 30,000 sq ft75 ft20 ft50 ft35 ft, 2.5 storiesVariesVaries
R-25NLots of 25,000 sq ft30 ft10 ft50 ft35 ft, 2.5 storiesVariesVaries
R-25Lots of 25,000 sq ft50 ft15 ft50 ft35 ft, 2.5 storiesVariesVaries
R-21Lots of 21,000 sq ft50 ft15 ft50 ft35 ft, 2.5 storiesVariesVaries
R-15Lots of 15,000 sq ft40 ft15 ft40 ft35 ft, 2.5 storiesVariesVaries
R-10Lots of 10,500 sq ft40 ft10 ft40 ft35 ft, 2.5 storiesVariesVaries
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.

Hanover zoning questions

What are the setbacks in Hanover, NJ?

For a single-family house. Corner lots can differ.

  • R-40: 75 ft from the street, 20 ft on each side, 50 ft from the rear line.
  • R-40N: 75 ft from the street, 15 ft on each side, 50 ft from the rear line.
  • R-30: 75 ft from the street, 20 ft on each side, 50 ft from the rear line.
  • R-25N: 30 ft from the street, 10 ft on each side, 50 ft from the rear line.
  • R-25: 50 ft from the street, 15 ft on each side, 50 ft from the rear line.
  • R-21: 50 ft from the street, 15 ft on each side, 50 ft from the rear line.
  • R-15: 40 ft from the street, 15 ft on each side, 40 ft from the rear line.
  • R-10: 40 ft from the street, 10 ft on each side, 40 ft from the rear line.

What is the minimum lot size in Hanover?

R-40: 40,500 sq ft; R-40N: 40,500 sq ft; R-30: 30,000 sq ft; R-25N: 25,000 sq ft; R-25: 25,000 sq ft; R-21: 21,000 sq ft; R-15: 15,000 sq ft; R-10: 10,500 sq ft.

How tall can a house be in Hanover?

R-40: 35 ft, 2.5 stories; R-40N: 35 ft, 2.5 stories; R-30: 35 ft, 2.5 stories; R-25N: 35 ft, 2.5 stories; R-25: 35 ft, 2.5 stories; R-21: 35 ft, 2.5 stories; R-15: 35 ft, 2.5 stories; R-10: 35 ft, 2.5 stories.

Can you recommend an architect in Hanover?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Hanover. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Hanover and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 15, 2026 from the Township of Hanover's Chapter 166, Land Use and Development, Part 5, Zoning: the single-family bulk regulations of the R-40, R-40N, R-30, R-25N, R-25, R-21, R-15 and R-10 districts, and Section 166-113.1, Building coverage, improvement coverage and floor area ratio requirements. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table