NJ Zoning Check

Chatham Borough zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot in Chatham Borough's R-1, R-2, R-3 or R-4 district and see, line by line, whether a detached house or addition meets the Borough's lot, yard, height, coverage and floor area limits.

Covers the Borough of Chatham's single-family zones R-1, R-2, R-3 and R-4, Morris County. Checks a new house, an addition or an attached garage.

Numbers last checked November 11, 2026 against Section 165-14 of the Borough's online code.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Chatham Borough

Chatham Borough has 4 single-family zones covered here: R-1, R-2, R-3 and R-4. Minimum lot sizes run from 7,500 sq ft (R-3) to 15,000 sq ft (R-1). Houses can be up to 35 ft tall.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
Depends on your lot
From each side
Depends on your lot
From the back
Depends on your lot
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings togetherEverything built on the lot
R-1Lots of 15,000 sq ftVariesVariesVaries35 ft, 2.5 storiesVariesVaries
R-2Lots of 9,300 sq ftVariesVariesVaries35 ft, 2.5 storiesVariesVaries
R-3Lots of 7,500 sq ftVariesVariesVaries35 ft, 2.5 storiesVariesVaries
R-4Lots of 9,300 sq ftVariesVariesVaries35 ft, 2.5 storiesVariesVaries
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 11, 2026. Confirm with the town before you design or buy.

Chatham Borough zoning questions

What is the minimum lot size in Chatham Borough?

R-1: 15,000 sq ft; R-2: 9,300 sq ft; R-3: 7,500 sq ft; R-4: 9,300 sq ft.

How tall can a house be in Chatham Borough?

R-1: 35 ft, 2.5 stories; R-2: 35 ft, 2.5 stories; R-3: 35 ft, 2.5 stories; R-4: 35 ft, 2.5 stories.

Can you recommend an architect in Chatham Borough?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Chatham Borough. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Chatham Borough and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 11, 2026 from Section 165-14 of the Borough of Chatham's online code, last amended by Ordinances 15-14, 17-12 and 24-03, and compared with a published copy of the same section. Check every requirement against the current code, including any later ordinances, before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table