NJ Zoning Check

Wrightstown zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Wrightstown's R-1, R-2 or R-3 District and see, line by line, whether a house, addition or detached garage meets the Borough's lot, yard, height and coverage limits. The check is free.

Covers the Borough of Wrightstown's single-family zones R-1, R-2 and R-3, Burlington County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 15, 2026 against the Borough's online code.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Wrightstown

Wrightstown has 3 single-family zones covered here: R-1, R-2 and R-3. Minimum lot sizes run from 9,000 sq ft (R-1) to 15,000 sq ft (R-3). A house must sit 30 ft (R-1) to 40 ft (R-3) back from the street and 40 ft (R-1) to 60 ft (R-3) from the rear lot line. Houses can be up to 30 ft tall. Buildings may cover up to 20% of the lot.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
30 to 40 ft
From each side
10 to 20 ft
From the back
40 to 60 ft
Height
30 ft
See the limits for every zone
ZoneFrontEach sideRearHeightHouse coverage
R-1Lots of 9,000 sq ft30 ft10 ft40 ft30 ft, 2.5 stories20%
R-2Lots of 12,000 sq ft30 ft10 ft40 ft30 ft, 2.5 stories20%
R-3Lots of 15,000 sq ft40 ft20 ft60 ft30 ft, 2.5 stories20%
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.

Wrightstown zoning questions

What are the setbacks in Wrightstown, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 30 ft from the street, 10 ft on each side, 40 ft from the rear line.
  • R-2: 30 ft from the street, 10 ft on each side, 40 ft from the rear line.
  • R-3: 40 ft from the street, 20 ft on each side, 60 ft from the rear line.

What is the minimum lot size in Wrightstown?

R-1: 9,000 sq ft; R-2: 12,000 sq ft; R-3: 15,000 sq ft.

How tall can a house be in Wrightstown?

R-1: 30 ft, 2.5 stories; R-2: 30 ft, 2.5 stories; R-3: 30 ft, 2.5 stories.

How much of my lot can I cover in Wrightstown?

R-1: 20% building coverage; R-2: 20% building coverage; R-3: 20% building coverage.

Can you recommend an architect in Wrightstown?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Wrightstown. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Wrightstown and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 15, 2026 from the Borough of Wrightstown's Chapter 219, Zoning, Section 219-13. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table