NJ Zoning Check

Springfield (Burl. Co.) zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot in Springfield's AR-10 or HMR-3 District and see, line by line, whether a house, addition or detached garage meets the Township's lot, yard, height and coverage limits. The check is free.

Covers the Township of Springfield's single-family zones AR-10 and HMR-3, Burlington County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 15, 2026 against the Township's Bulk Regulations Schedule.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Springfield (Burl. Co.)

Springfield (Burl. Co.) has 2 single-family zones covered here: AR-10 and HMR-3. Minimum lot sizes run from 3 acres (HMR-3) to 10 acres (AR-10). A house must sit 10 ft (HMR-3) to 50 ft (AR-10) back from the street and 35 ft from the rear lot line. Houses can be up to 30 ft tall. Building coverage limits run from 4% (AR-10) to 7.5% (HMR-3).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
10 to 50 ft
From each side
10 to 20 ft
From the back
35 ft
Height
30 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings togetherTotal impervious coverage
AR-10Lots of 10 acres50 ft20 ft, 50 ft total35 ft30 ft, 2.5 stories4%10%
HMR-3Lots of 3 acres10 ft10 ft35 ft30 ft, 2.5 stories7.5%20%
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.

Springfield (Burl. Co.) zoning questions

What are the setbacks in Springfield (Burl. Co.), NJ?

For a single-family house. Corner lots can differ.

  • AR-10: 50 ft from the street, 20 ft on each side (50 ft in total), 35 ft from the rear line.
  • HMR-3: 10 ft from the street, 10 ft on each side, 35 ft from the rear line.

What is the minimum lot size in Springfield (Burl. Co.)?

AR-10: 10 acres; HMR-3: 3 acres.

How tall can a house be in Springfield (Burl. Co.)?

AR-10: 30 ft, 2.5 stories; HMR-3: 30 ft, 2.5 stories.

How much of my lot can I cover in Springfield (Burl. Co.)?

AR-10: 4% building coverage, 10% lot coverage; HMR-3: 7.5% building coverage, 20% lot coverage.

Can you recommend an architect in Springfield (Burl. Co.)?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Springfield (Burl. Co.). It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Springfield (Burl. Co.) and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 15, 2026 from the Township of Springfield's (Burlington County) Chapter 215, Zoning, Attachment 1, Bulk Regulations Schedule (Supplement 21, March 2026). Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table