NJ Zoning Check

Riverside zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot in Riverside's R-1, R-2, R-3 or R-4 District and see, line by line, whether a house, addition, detached garage or shed meets the Township's lot, yard, height and coverage limits. The check is free.

Covers the Township of Riverside's single-family zones R-1, R-2, R-3 and R-4, Burlington County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 15, 2026 against the Township's district tables.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Riverside

Riverside has 4 single-family zones covered here: R-1, R-2, R-3 and R-4. Minimum lot sizes run from 4,000 sq ft (R-3) to 7,500 sq ft (R-4). A house must sit 15 ft (R-3) to 25 ft (R-1) back from the street and 25 ft from the rear lot line. Houses can be up to 35 ft tall. Up to 80% of the lot may be covered.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
15 to 25 ft
From each side
8 ft
From the back
25 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightEverything built on the lot
R-1Lots of 6,000 sq ft25 ft8 ft, 24 ft total25 ft35 ft, 2.5 stories80%
R-2Lots of 5,000 sq ft20 ft8 ft, 24 ft total25 ft35 ft, 2.5 stories80%
R-3Lots of 4,000 sq ft15 ft8 ft, 24 ft total25 ft35 ft, 2.5 stories80%
R-4Lots of 7,500 sq ft25 ft8 ft, 24 ft total25 ft35 ft, 2.5 stories80%
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.

Riverside zoning questions

What are the setbacks in Riverside, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 25 ft from the street, 8 ft on each side (24 ft in total), 25 ft from the rear line.
  • R-2: 20 ft from the street, 8 ft on each side (24 ft in total), 25 ft from the rear line.
  • R-3: 15 ft from the street, 8 ft on each side (24 ft in total), 25 ft from the rear line.
  • R-4: 25 ft from the street, 8 ft on each side (24 ft in total), 25 ft from the rear line.

What is the minimum lot size in Riverside?

R-1: 6,000 sq ft; R-2: 5,000 sq ft; R-3: 4,000 sq ft; R-4: 7,500 sq ft.

How tall can a house be in Riverside?

R-1: 35 ft, 2.5 stories; R-2: 35 ft, 2.5 stories; R-3: 35 ft, 2.5 stories; R-4: 35 ft, 2.5 stories.

How much of my lot can I cover in Riverside?

R-1: 80% lot coverage; R-2: 80% lot coverage; R-3: 80% lot coverage; R-4: 80% lot coverage.

Can you recommend an architect in Riverside?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Riverside. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Riverside and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 15, 2026 from the Township of Riverside's Chapter 255, Land Development, Sections 255-85 to 255-88 and 255-45. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table