NJ Zoning Check

Mansfield (Burlington) zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Mansfield's R-1, R-4 or R-5 District and see, line by line, whether a house or addition meets the Township's lot, yard, height and coverage limits. The check is free.

Covers the Township of Mansfield's single-family zones R-1, R-4 and R-5, Burlington County. Checks a new house, an addition or an attached garage.

Numbers last checked November 15, 2026 against the Township's Schedule of Area and Bulk Regulations.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Mansfield (Burlington)

Mansfield (Burlington) has 3 single-family zones covered here: R-1, R-4 and R-5. Minimum lot sizes run from 3,000 sq ft (R-4) to 3 acres (R-1). A house must sit 25 ft (R-4) to 50 ft (R-1) back from the street and 20 ft (R-5) to 35 ft (R-1) from the rear lot line. Houses can be up to 35 ft tall. Building coverage limits run from 25% (R-1) to 40% (R-4) in the zones that set one (R-1, R-4).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
25 to 50 ft
From each side
5 to 20 ft
From the back
20 to 35 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightEverything built on the lot
R-1Lots of 3 acres50 ft20 ft, 50 ft total35 ft35 ft25%
R-4Lots of 3,000 sq ft25 ft5 ft25 ft35 ft40%
R-5Lots of 5,000 sq ft25 ft5 ft, 15 ft total20 ft35 ft—
  • A dash means this check has no limit for that item.
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.

Mansfield (Burlington) zoning questions

What are the setbacks in Mansfield (Burlington), NJ?

For a single-family house. Corner lots can differ.

  • R-1: 50 ft from the street, 20 ft on each side (50 ft in total), 35 ft from the rear line.
  • R-4: 25 ft from the street, 5 ft on each side, 25 ft from the rear line.
  • R-5: 25 ft from the street, 5 ft on each side (15 ft in total), 20 ft from the rear line.

What is the minimum lot size in Mansfield (Burlington)?

R-1: 3 acres; R-4: 3,000 sq ft; R-5: 5,000 sq ft.

How tall can a house be in Mansfield (Burlington)?

R-1: 35 ft; R-4: 35 ft; R-5: 35 ft.

How much of my lot can I cover in Mansfield (Burlington)?

R-1: 25% building coverage; R-4: 40% building coverage.

Can you recommend an architect in Mansfield (Burlington)?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Mansfield (Burlington). It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Mansfield (Burlington) and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 15, 2026 from the Township of Mansfield's Chapter 65, Zoning, Attachment 2, Schedule of Area and Bulk Regulations (Supplement 21, April 2023). Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table