NJ Zoning Check

Washington (Burlington) zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a house in Washington Township's Pinelands Village-Residential zone and see, line by line, whether a house, addition, shed or detached garage meets the Township's lot, yard, coverage and height limits.

Covers the Township of Washington's single-family zones PVR and PVR-E, Burlington County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 16, 2026 against the Township's Chapter 275, Section 275-13.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Washington (Burlington)

Washington (Burlington) has 2 single-family zones covered here: PVR and PVR-E. Minimum lot sizes run from 1 acre (PVR-E) to 139,392 sq ft (PVR). A house must sit 50 ft back from the street and 40 ft from the rear lot line. Houses can be up to 35 ft tall. Buildings may cover up to 20% of the lot.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
50 ft
From each side
20 ft
From the back
40 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightCoverage by buildingsCoverage by all structures and improvements
PVRLots of 139,392 sq ft50 ft20 ft40 ft35 ft, 2.5 stories20%30%
PVR-ELots of 1 acre50 ft20 ft40 ft35 ft, 2.5 stories20%30%
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Washington (Burlington) zoning questions

What are the setbacks in Washington (Burlington), NJ?

For a single-family house. Corner lots can differ.

  • PVR: 50 ft from the street, 20 ft on each side, 40 ft from the rear line.
  • PVR-E: 50 ft from the street, 20 ft on each side, 40 ft from the rear line.

What is the minimum lot size in Washington (Burlington)?

PVR: 139,392 sq ft; PVR-E: 1 acre.

How tall can a house be in Washington (Burlington)?

PVR: 35 ft, 2.5 stories; PVR-E: 35 ft, 2.5 stories.

How much of my lot can I cover in Washington (Burlington)?

PVR: 20% building coverage, 30% lot coverage; PVR-E: 20% building coverage, 30% lot coverage.

Can you recommend an architect in Washington (Burlington)?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Washington (Burlington). It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Washington (Burlington) and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the Township of Washington's Chapter 275, Land Development, Section 275-13. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table