NJ Zoning Check

Mount Holly zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot in Mount Holly's R-1, R-2 or R-3 Residence District and see, line by line, whether a house or addition meets the Township's lot, yard and height limits. The check is free.

Covers the Township of Mount Holly's single-family zones R-1, R-2 and R-3, Burlington County. Checks a new house, an addition or an attached garage.

Numbers last checked November 15, 2026 against the Township's online code.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Mount Holly

Mount Holly has 3 single-family zones covered here: R-1, R-2 and R-3. Minimum lot sizes run from 5,000 sq ft (R-3) to 15,000 sq ft (R-1). A house must sit 25 ft (R-3) to 35 ft (R-1) back from the street and 35 ft from the rear lot line. Houses can be up to 35 ft tall.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
25 to 35 ft
From each side
6 to 10 ft
From the back
35 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeight
R-1Lots of 15,000 sq ft35 ftVaries35 ft35 ft, 2.5 stories
R-2Lots of 7,200 sq ft35 ftVaries35 ft35 ft, 2.5 stories
R-3Lots of 5,000 sq ft25 ftVaries35 ft35 ft, 2.5 stories
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.

Mount Holly zoning questions

What are the setbacks in Mount Holly, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 35 ft from the street, 10 ft on each side, 35 ft from the rear line.
  • R-2: 35 ft from the street, 8 ft on each side, 35 ft from the rear line.
  • R-3: 25 ft from the street, 6 ft on each side, 35 ft from the rear line.

What is the minimum lot size in Mount Holly?

R-1: 15,000 sq ft; R-2: 7,200 sq ft; R-3: 5,000 sq ft.

How tall can a house be in Mount Holly?

R-1: 35 ft, 2.5 stories; R-2: 35 ft, 2.5 stories; R-3: 35 ft, 2.5 stories.

Can you recommend an architect in Mount Holly?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Mount Holly. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Mount Holly and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 15, 2026 from the Township of Mount Holly's Chapter 149, Land Use, Sections 149-94, the R-2 requirements in Article XV, and 149-98. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table