NJ Zoning Check

Maple Shade zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Maple Shade's RA, R-1 or R-2 zone and see, line by line, whether a house or addition meets the Township's lot, yard, height and coverage limits.

Covers the Township of Maple Shade's single-family zones RA, R-1 and R-2, Burlington County. Checks a new house, an addition or an attached garage.

Numbers last checked November 4, 2026 against the Township's online code.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Maple Shade

Maple Shade has 3 single-family zones covered here: RA, R-1 and R-2. Minimum lot sizes run from 6,000 sq ft (R-2) to 12,000 sq ft (RA). A house must sit 20 ft (R-2) to 35 ft (RA) back from the street and 20 ft (R-2) to 30 ft (RA) from the rear lot line. Houses can be up to 35 ft tall. Building coverage limits run from 30% (RA) to 50% (R-2).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
20 to 35 ft
From each side
6 to 12 ft
From the back
20 to 30 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightBuilding area
RALots of 12,000 sq ft35 ft12 ft, 30 ft total30 ft35 ft30%
R-1Lots of 9,000 sq ft30 ft8 ft, 20 ft total25 ft35 ft35%
R-2Lots of 6,000 sq ft20 ft6 ft, 16 ft total20 ft35 ft50%
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 4, 2026. Confirm with the town before you design or buy.

Maple Shade zoning questions

What are the setbacks in Maple Shade, NJ?

For a single-family house. Corner lots can differ.

  • RA: 35 ft from the street, 12 ft on each side (30 ft in total), 30 ft from the rear line.
  • R-1: 30 ft from the street, 8 ft on each side (20 ft in total), 25 ft from the rear line.
  • R-2: 20 ft from the street, 6 ft on each side (16 ft in total), 20 ft from the rear line.

What is the minimum lot size in Maple Shade?

RA: 12,000 sq ft; R-1: 9,000 sq ft; R-2: 6,000 sq ft.

How tall can a house be in Maple Shade?

RA: 35 ft; R-1: 35 ft; R-2: 35 ft.

How much of my lot can I cover in Maple Shade?

RA: 30% building coverage; R-1: 35% building coverage; R-2: 50% building coverage.

Can you recommend an architect in Maple Shade?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Maple Shade. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Maple Shade and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 4, 2026 from the Township's Chapter 205, Zoning, Sections 205-13, 205-17 and 205-21 and their height sections. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table