NJ Zoning Check

White zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a house in White Township's R-1 or R-2 district and see, line by line, whether a new house or addition meets the Township's lot, yard, height and coverage limits.

Covers the Township of White's single-family zones R-1 and R-2, Warren County. Checks a new house, an addition or an attached garage.

Numbers last checked November 16, 2026 against the Township's Chapter 160, Sections 160-130 and 160-149.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in White

White has 2 single-family zones covered here: R-1 and R-2. Minimum lot sizes run from 65,000 sq ft (R-2) to 3 acres (R-1). A house must sit 50 ft (R-2) to 75 ft (R-1) back from the street and 50 ft (R-2) to 75 ft (R-1) from the rear lot line. Houses can be up to 35 ft tall. Buildings may cover up to 10% of the lot.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
50 to 75 ft
From each side
25 ft
From the back
50 to 75 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings together
R-1Lots of 3 acres75 ft25 ft, 60 ft total75 ft35 ft, 2.5 stories10%
R-2Lots of 65,000 sq ft50 ft25 ft, 60 ft total50 ft35 ft, 2.5 stories10%
  • Coverage is a share of the lot.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

White zoning questions

What are the setbacks in White, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 75 ft from the street, 25 ft on each side (60 ft in total), 75 ft from the rear line.
  • R-2: 50 ft from the street, 25 ft on each side (60 ft in total), 50 ft from the rear line.

What is the minimum lot size in White?

R-1: 3 acres; R-2: 65,000 sq ft.

How tall can a house be in White?

R-1: 35 ft, 2.5 stories; R-2: 35 ft, 2.5 stories.

How much of my lot can I cover in White?

R-1: 10% building coverage; R-2: 10% building coverage.

Can you recommend an architect in White?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in White. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in White and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the Township of White's Chapter 160, Sections 160-130 and 160-149. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table