NJ Zoning Check

Belvidere zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a single-family lot in Belvidere's R-100 or R-75 District and see, line by line, whether a house, addition or detached garage or shed meets the Town's lot, yard, height and coverage limits. The check is free.

Covers the Town of Belvidere's single-family zones R-100 and R-75, Warren County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 16, 2026 against the R-100 and R-75 lot and yard schedules in the Town's zoning chapter.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Belvidere

Belvidere has 2 single-family zones covered here: R-100 and R-75. Minimum lot sizes run from 11,250 sq ft (R-75) to 20,000 sq ft (R-100). A house must sit 30 ft (R-75) to 40 ft (R-100) back from the street and 40 ft (R-75) to 50 ft (R-100) from the rear lot line. Houses can be up to 35 ft tall. Lot coverage limits run from 20% (R-100) to 25% (R-75).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
30 to 40 ft
From each side
10 to 15 ft
From the back
40 to 50 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightEverything built on the lot
R-100Lots of 20,000 sq ft40 ft15 ft, 40 ft total50 ft35 ft20%
R-75Lots of 11,250 sq ft30 ft10 ft, 25 ft total40 ft35 ft25%
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Belvidere zoning questions

What are the setbacks in Belvidere, NJ?

For a single-family house. Corner lots can differ.

  • R-100: 40 ft from the street, 15 ft on each side (40 ft in total), 50 ft from the rear line.
  • R-75: 30 ft from the street, 10 ft on each side (25 ft in total), 40 ft from the rear line.

What is the minimum lot size in Belvidere?

R-100: 20,000 sq ft; R-75: 11,250 sq ft.

How tall can a house be in Belvidere?

R-100: 35 ft; R-75: 35 ft.

How much of my lot can I cover in Belvidere?

R-100: 20% lot coverage; R-75: 25% lot coverage.

Can you recommend an architect in Belvidere?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Belvidere. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Belvidere and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the Town of Belvidere's Chapter 505, Zoning, Sections 505-10 to 505-12, 505-28, 505-29, 505-33 and 505-34. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table