Enter your address to find your zone and see if your project fits. No account needed.
About these numbers
Enter a single-family lot in Franklin Township's RC or R-75 District and see, line by line, whether a house, addition or detached garage or barn meets the Township's lot, yard, height and coverage limits. The check is free.
Covers the Township of Franklin's single-family zones RC and R-75, Warren County. Checks a new house, an addition, an attached garage or a detached garage, barn or shed.
Franklin Twp (Warren) has 2 single-family zones covered here: RC and R-75. Each needs a lot of at least 30,000 sq ft in most zones. A house must sit 50 ft back from the street and 40 ft from the rear lot line in most zones. Houses can be up to 35 ft tall. Up to 25% of the lot may be covered in R-75; in RC it depends on the lot.
New house or addition
Depends on your zone. Your address will show your exact numbers.
From the street
50 ft in most zones
From each side
20 ft in most zones
From the back
40 ft in most zones
Height
35 ft
See the limits for every zone
Zone
Front
Each side
Rear
Height
Everything built on the lot
RC
Varies
Varies
Varies
35 ft, 2.5 stories
Varies
R-75Lots of 30,000 sq ft
50 ft
20 ft
40 ft
35 ft, 2.5 stories
25%
Varies means the limit depends on details of your lot. Check your address to see what we can work out.
Coverage is a share of the lot.
Sheds and detached garages have their own rules. Enter your address above to see them.
Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.
Franklin Twp (Warren) zoning questions
What are the setbacks in Franklin Twp (Warren), NJ?
For a single-family house. Corner lots can differ.
R-75: 50 ft from the street, 20 ft on each side, 40 ft from the rear line.
What is the minimum lot size in Franklin Twp (Warren)?
R-75: 30,000 sq ft. In the other zones it depends on the lot.
How tall can a house be in Franklin Twp (Warren)?
RC: 35 ft, 2.5 stories; R-75: 35 ft, 2.5 stories.
How much of my lot can I cover in Franklin Twp (Warren)?
R-75: 25% lot coverage. In the other zones it depends on the lot.
Can you recommend an architect in Franklin Twp (Warren)?
Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Franklin Twp (Warren). It's free and there's no obligation.
We'll connect you with a vetted, licensed residential architect who works in Franklin Twp (Warren) and can turn what your lot allows into drawings for your permit. Free, with no obligation.
Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.
Rules that stand out
Drawn from this town's rules and the other zones on this site. Confirm each one with the zoning officer.
The full table is unlocked on this browser.
Get the full report
The check above shows whether each line complies. The full report gives every requirement for your zone and the complete table, with every line filled in and ready to copy or print onto a drawing sheet. It's a one-time purchase, and one key unlocks every town on this site, for as many projects as you like.
By buying or unlocking the full report you agree to the terms of use.
What this does not check
The buildable area each lot must hold inside its setbacks, critical areas, and karst (carbonate) rules, which cover the whole Township.
Cluster and lot averaging subdivisions themselves, farms, and the commercial and industrial districts.
Pools, fences and flood rules.
Where the numbers come from
Requirements were entered on November 16, 2026 from the Township of Franklin's Chapter 90, Land Use and Development, Attachment 11 (Schedule of Area, Bulk and Yard Requirements) and Section 90-3. Check every requirement against the current code before relying on it.
A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.