NJ Zoning Check

Liberty zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot in Liberty's AG, R-1, R-3 or R-4 Zone and see, line by line, whether a house, addition or detached garage or shed meets the Township's lot, yard, height and coverage limits. The check is free.

Covers the Township of Liberty's single-family zones AG, R-1, R-3 and R-4, Warren County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 16, 2026 against the required conditions for the AG, R-1, R-3 and R-4 Zones in the Township's zoning chapter.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Liberty

Liberty has 4 single-family zones covered here: AG, R-1, R-3 and R-4. Minimum lot sizes run from 15,000 sq ft (R-4) to 6 acres (AG). A house must sit 100 ft back from the street and 25 ft (R-4) to 75 ft (R-3) from the rear lot line in most zones. Houses can be up to 35 ft tall. Building coverage limits run from 10% (AG) to 20% (R-1) in the zones that set one (AG, R-1, R-3).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
Depends on your lot
From each side
15 to 35 ft
From the back
25 to 75 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings together
AGLots of 6 acres100 ft30 ft50 ft35 ft, 2.5 stories10%
R-1Lots of 2 acresVaries35 ft50 ft35 ft, 2.5 stories20%
R-3Lots of 3 acresVaries35 ft75 ft35 ft, 2.5 stories20%
R-4Lots of 15,000 sq ftVaries15 ft25 ft35 ft, 2.5 stories—
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • A dash means this check has no limit for that item.
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Liberty zoning questions

What are the setbacks in Liberty, NJ?

For a single-family house. Corner lots can differ.

  • AG: 100 ft from the street, 30 ft on each side, 50 ft from the rear line.
  • R-1: 35 ft on each side, 50 ft from the rear line.
  • R-3: 35 ft on each side, 75 ft from the rear line.
  • R-4: 15 ft on each side, 25 ft from the rear line.

What is the minimum lot size in Liberty?

AG: 6 acres; R-1: 2 acres; R-3: 3 acres; R-4: 15,000 sq ft.

How tall can a house be in Liberty?

AG: 35 ft, 2.5 stories; R-1: 35 ft, 2.5 stories; R-3: 35 ft, 2.5 stories; R-4: 35 ft, 2.5 stories.

How much of my lot can I cover in Liberty?

AG: 10% building coverage; R-1: 20% building coverage; R-3: 20% building coverage.

Can you recommend an architect in Liberty?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Liberty. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Liberty and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the Township of Liberty's Chapter 105, Zoning, Article IX (AG Zone) and Sections 105-6, 105-10, 105-63, 105-66.2 and 105-68. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table