NJ Zoning Check

Sussex zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a house in Sussex Borough's R-1 or R-2 district and see, line by line, whether a house, addition, shed or detached garage meets the Borough's lot, setback, height and coverage limits.

Covers the Borough of Sussex's single-family zones R-1 and R-2, Sussex County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 16, 2026 against the Borough's Chapter 19, Sections 19-6.4 and 19-7.4.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Sussex

Sussex has 2 single-family zones covered here: R-1 and R-2. Minimum lot sizes run from 10,000 sq ft (R-1) to 15,000 sq ft (R-2). A house must sit 25 ft back from the street and 10 ft (R-1) to 50 ft (R-2) from the rear lot line. Houses can be up to 35 ft tall. Buildings may cover up to 20% of the lot.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
25 ft
From each side
10 ft
From the back
10 to 50 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings together
R-1Lots of 10,000 sq ft25 ft10 ft10 ft35 ft20%
R-2Lots of 15,000 sq ft25 ft10 ft50 ft35 ft20%
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Sussex zoning questions

What are the setbacks in Sussex, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 25 ft from the street, 10 ft on each side, 10 ft from the rear line.
  • R-2: 25 ft from the street, 10 ft on each side, 50 ft from the rear line.

What is the minimum lot size in Sussex?

R-1: 10,000 sq ft; R-2: 15,000 sq ft.

How tall can a house be in Sussex?

R-1: 35 ft; R-2: 35 ft.

How much of my lot can I cover in Sussex?

R-1: 20% building coverage; R-2: 20% building coverage.

Can you recommend an architect in Sussex?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Sussex. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Sussex and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the Borough of Sussex's Chapter 19, Zoning, Sections 19-6.4 and 19-7.4. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table