NJ Zoning Check

Hampton (Sussex) zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a house in Hampton Township's R-3, R-2 or R-1.5 district and see, line by line, whether a house, addition, shed or detached garage meets the Township's lot, yard, coverage and height limits.

Covers the Township of Hampton's single-family zones R-2, R-1.5 and R-3, Sussex County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 16, 2026 against the Township's Chapter 108, Sections 108-12, 108-12.1, 108-12.2 and Article V.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Hampton (Sussex)

Hampton (Sussex) has 3 single-family zones covered here: R-2, R-1.5 and R-3. Minimum lot sizes run from 65,340 sq ft (R-1.5) to 3 acres (R-3). A house must sit 50 ft (R-2) to 75 ft (R-3) back from the street and 50 ft (R-2) to 75 ft (R-3) from the rear lot line. Houses can be up to 35 ft tall. Buildings may cover up to 10% of the lot.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
50 to 75 ft
From each side
35 ft
From the back
50 to 75 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightBuilding coverage (house)
R-2Lots of 2 acres50 ft35 ft50 ft35 ft10%
R-1.5Lots of 65,340 sq ft50 ft35 ft50 ft35 ft10%
R-3Lots of 3 acres75 ft35 ft75 ft35 ft10%
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Hampton (Sussex) zoning questions

What are the setbacks in Hampton (Sussex), NJ?

For a single-family house. Corner lots can differ.

  • R-2: 50 ft from the street, 35 ft on each side, 50 ft from the rear line.
  • R-1.5: 50 ft from the street, 35 ft on each side, 50 ft from the rear line.
  • R-3: 75 ft from the street, 35 ft on each side, 75 ft from the rear line.

What is the minimum lot size in Hampton (Sussex)?

R-2: 2 acres; R-1.5: 65,340 sq ft; R-3: 3 acres.

How tall can a house be in Hampton (Sussex)?

R-2: 35 ft; R-1.5: 35 ft; R-3: 35 ft.

How much of my lot can I cover in Hampton (Sussex)?

R-2: 10% building coverage; R-1.5: 10% building coverage; R-3: 10% building coverage.

Can you recommend an architect in Hampton (Sussex)?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Hampton (Sussex). It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Hampton (Sussex) and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the Township of Hampton's Chapter 108, Zoning, Sections 108-12, 108-12.1, 108-12.2 and Article V. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table