NJ Zoning Check

Ogdensburg zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a house in one of Ogdensburg's residential districts and see, line by line, whether a house, addition, shed or detached garage meets the Borough's lot, yard, height and coverage limits.

Covers the Borough of Ogdensburg's single-family zones R10, R15, R30, R40 and R100, Sussex County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 16, 2026 against the Borough's Chapter 30, Sections 30-404 to 30-408 and 30-501.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Ogdensburg

Ogdensburg has 5 single-family zones covered here: R10, R15, R30, R40 and R100. Minimum lot sizes run from 10,000 sq ft (R10) to 100,000 sq ft (R100). A house must sit 35 ft (R10) to 75 ft (R40) back from the street and 30 ft (R10) to 75 ft (R40) from the rear lot line. Houses can be up to 35 ft tall. Lot coverage limits run from 15% (R100) to 30% (R10).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
35 to 75 ft
From each side
10 to 40 ft
From the back
30 to 75 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightEverything built on the lot
R10Lots of 10,000 sq ft35 ft10 ft, 25 ft total30 ft35 ft30%
R15Lots of 15,000 sq ft35 ft10 ft, 25 ft total30 ft35 ft30%
R30Lots of 30,000 sq ft60 ft25 ft60 ft35 ft30%
R40Lots of 40,000 sq ft75 ft35 ft75 ft35 ft30%
R100Lots of 100,000 sq ft75 ft40 ft75 ft35 ft15%
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Ogdensburg zoning questions

What are the setbacks in Ogdensburg, NJ?

For a single-family house. Corner lots can differ.

  • R10: 35 ft from the street, 10 ft on each side (25 ft in total), 30 ft from the rear line.
  • R15: 35 ft from the street, 10 ft on each side (25 ft in total), 30 ft from the rear line.
  • R30: 60 ft from the street, 25 ft on each side, 60 ft from the rear line.
  • R40: 75 ft from the street, 35 ft on each side, 75 ft from the rear line.
  • R100: 75 ft from the street, 40 ft on each side, 75 ft from the rear line.

What is the minimum lot size in Ogdensburg?

R10: 10,000 sq ft; R15: 15,000 sq ft; R30: 30,000 sq ft; R40: 40,000 sq ft; R100: 100,000 sq ft.

How tall can a house be in Ogdensburg?

R10: 35 ft; R15: 35 ft; R30: 35 ft; R40: 35 ft; R100: 35 ft.

How much of my lot can I cover in Ogdensburg?

R10: 30% lot coverage; R15: 30% lot coverage; R30: 30% lot coverage; R40: 30% lot coverage; R100: 15% lot coverage.

Can you recommend an architect in Ogdensburg?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Ogdensburg. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Ogdensburg and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the Borough of Ogdensburg's Chapter 30, Land Development Regulations, Sections 30-404 through 30-408 and 30-501. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table