NJ Zoning Check

Newton zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a house in Newton's T-2 or T-3 transect zone and see, line by line, whether a house, addition, shed or detached garage meets the Town's lot, setback, height and coverage limits.

Covers the Town of Newton's single-family zones T-2 and T-3, Sussex County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 16, 2026 against the Town's Form-Based Code, Chapter 320, Sections 320-6 and 320-7.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Newton

Newton has 2 single-family zones covered here: T-2 and T-3. Minimum lot sizes run from 9,000 sq ft (T-3) to 1 acre (T-2). A house must sit 35 ft (T-3) to 40 ft (T-2) back from the street and 20 ft (T-2) to 30 ft (T-3) from the rear lot line. Houses can be up to 35 ft tall. Up to 60% of the lot may be covered in the zones that set one (T-3).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
35 to 40 ft
From each side
12 to 20 ft
From the back
20 to 30 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightEverything built on the lot
T-2Lots of 1 acre40 ft20 ft20 ft35 ft, 2 stories—
T-3Lots of 9,000 sq ft35 ft12 ft30 ft35 ft, 2 stories60%
  • A dash means this check has no limit for that item.
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Newton zoning questions

What are the setbacks in Newton, NJ?

For a single-family house. Corner lots can differ.

  • T-2: 40 ft from the street, 20 ft on each side, 20 ft from the rear line.
  • T-3: 35 ft from the street, 12 ft on each side, 30 ft from the rear line.

What is the minimum lot size in Newton?

T-2: 1 acre; T-3: 9,000 sq ft.

How tall can a house be in Newton?

T-2: 35 ft, 2 stories; T-3: 35 ft, 2 stories.

How much of my lot can I cover in Newton?

T-3: 60% lot coverage.

Can you recommend an architect in Newton?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Newton. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Newton and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the Town of Newton's Chapter 320, Zoning: Form-Based Code, Sections 320-6 and 320-7. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table