NJ Zoning Check

Montague zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a house in Montague's R-3, R-5, R-4 or Route 206 Center Residential district and see, line by line, whether a house, addition, shed or detached garage meets the Township's lot, yard, coverage and height limits.

Covers the Township of Montague's single-family zones R-3, R-5, R-4 and RCRD, Sussex County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 16, 2026 against the Township's Chapter 76, Sections 76-29, 76-34, 76-58 and 76-76.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Montague

Montague has 4 single-family zones covered here: R-3, R-5, R-4 and RCRD. Minimum lot sizes run from 1 acre (R-4) to 3 acres (R-3). A house must sit 30 ft (R-5) to 50 ft (R-3) back from the street and 25 ft (R-5) to 50 ft (RCRD) from the rear lot line. Houses can be up to 35 ft tall. Buildings may cover up to 10% of the lot in the zones that set one (R-3, R-5).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
30 to 50 ft
From each side
20 to 35 ft
From the back
25 to 50 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings togetherEverything built on the lot
R-3Lots of 3 acres50 ft35 ft35 ft35 ft10%—
R-5Lots of 3 acres30 ft20 ft25 ft35 ft10%—
R-4Lots of 1 acre30 ft20 ft25 ft35 ft—25%
RCRDLots of 1 acre40 ft25 ft50 ft35 ft——
  • A dash means this check has no limit for that item.
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Montague zoning questions

What are the setbacks in Montague, NJ?

For a single-family house. Corner lots can differ.

  • R-3: 50 ft from the street, 35 ft on each side, 35 ft from the rear line.
  • R-5: 30 ft from the street, 20 ft on each side, 25 ft from the rear line.
  • R-4: 30 ft from the street, 20 ft on each side, 25 ft from the rear line.
  • RCRD: 40 ft from the street, 25 ft on each side, 50 ft from the rear line.

What is the minimum lot size in Montague?

R-3: 3 acres; R-5: 3 acres; R-4: 1 acre; RCRD: 1 acre.

How tall can a house be in Montague?

R-3: 35 ft; R-5: 35 ft; R-4: 35 ft; RCRD: 35 ft.

How much of my lot can I cover in Montague?

R-3: 10% building coverage; R-5: 10% building coverage; R-4: 25% lot coverage.

Can you recommend an architect in Montague?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Montague. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Montague and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the Township of Montague's Chapter 76, Zoning, Sections 76-29, 76-34, 76-58 and 76-76. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table