Enter your address to find your zone and see if your project fits. No account needed.
About these numbers
Enter a lot with a house in one of Stillwater's residential districts and see, line by line, whether a house, addition, shed or detached garage meets the Township's lot, setback and coverage limits.
Covers the Township of Stillwater's single-family zones R-30, R-5 and R-7.5, Sussex County. Checks a new house, an addition, an attached garage or a detached garage or shed.
Stillwater has 3 single-family zones covered here: R-30, R-5 and R-7.5. Minimum lot sizes run from 30,000 sq ft (R-30) to 326,700 sq ft (R-7.5). A house must sit 25 ft (R-30) to 75 ft (R-7.5) back from the street and 30 ft (R-30) to 75 ft (R-7.5) from the rear lot line. Up to 25% of the lot may be covered in R-30; in R-5 and R-7.5 it depends on the lot.
New house or addition
Depends on your zone. Your address will show your exact numbers.
From the street
25 to 75 ft
From each side
15 to 30 ft
From the back
30 to 75 ft
See the limits for every zone
Zone
Front
Each side
Rear
Height
Lot coverage by structures
R-30Lots of 30,000 sq ft
25 ft
15 ft
30 ft
—
25%
R-5Lots of 5 acres
50 ft
30 ft
50 ft
—
Varies
R-7.5Lots of 326,700 sq ft
75 ft
30 ft
75 ft
—
Varies
Varies means the limit depends on details of your lot. Check your address to see what we can work out.
A dash means this check has no limit for that item.
Coverage is a share of the lot.
Sheds and detached garages have their own rules. Enter your address above to see them.
Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.
Stillwater zoning questions
What are the setbacks in Stillwater, NJ?
For a single-family house. Corner lots can differ.
R-30: 25 ft from the street, 15 ft on each side, 30 ft from the rear line.
R-5: 50 ft from the street, 30 ft on each side, 50 ft from the rear line.
R-7.5: 75 ft from the street, 30 ft on each side, 75 ft from the rear line.
R-30: 25% lot coverage. In the other zones it depends on the lot.
Can you recommend an architect in Stillwater?
Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Stillwater. It's free and there's no obligation.
We'll connect you with a vetted, licensed residential architect who works in Stillwater and can turn what your lot allows into drawings for your permit. Free, with no obligation.
Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.
Rules that stand out
Drawn from this town's rules and the other zones on this site. Confirm each one with the zoning officer.
The full table is unlocked on this browser.
Get the full report
The check above shows whether each line complies. The full report gives every requirement for your zone and the complete table, with every line filled in and ready to copy or print onto a drawing sheet. It's a one-time purchase, and one key unlocks every town on this site, for as many projects as you like.
By buying or unlocking the full report you agree to the terms of use.
What this does not check
Building height.
Minimum contiguous developable land (one acre for new lots) and cluster subdivisions.
Lake-front accessory structures (Section 240-114L) and the recreation, conservation and commercial districts.
Where the numbers come from
Requirements were entered on November 16, 2026 from the Township of Stillwater's Chapter 240, Zoning, Sections 240-106, 240-107 and 240-108. Check every requirement against the current code before relying on it.
A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.