NJ Zoning Check

Woodstown zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a house in Woodstown's R2, R3 or R4 district and see, line by line, whether a house, addition, shed or detached garage meets the Borough's lot, yard, coverage and height limits.

Covers the Borough of Woodstown's single-family zones R2, R3 and R4, Salem County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 16, 2026 against the Borough's Chapter 67 Schedule of District Regulations (Maximum-Minimum Building Standards).

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Woodstown

Woodstown has 3 single-family zones covered here: R2, R3 and R4. Minimum lot sizes run from 6,000 sq ft (R2) to 6,800 sq ft (R4). A house must sit 30 ft back from the street and 20 ft from the rear lot line. Houses can be up to 35 ft tall. Up to 20% of the lot may be covered.

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
30 ft
From each side
10 ft
From the back
20 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightEverything paved or built
R2Lots of 6,000 sq ft30 ft10 ft20 ft35 ft20%
R3Lots of 6,000 sq ft30 ft10 ft20 ft35 ft20%
R4Lots of 6,800 sq ft30 ft10 ft20 ft35 ft20%
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Woodstown zoning questions

What are the setbacks in Woodstown, NJ?

For a single-family house. Corner lots can differ.

  • R2: 30 ft from the street, 10 ft on each side, 20 ft from the rear line.
  • R3: 30 ft from the street, 10 ft on each side, 20 ft from the rear line.
  • R4: 30 ft from the street, 10 ft on each side, 20 ft from the rear line.

What is the minimum lot size in Woodstown?

R2: 6,000 sq ft; R3: 6,000 sq ft; R4: 6,800 sq ft.

How tall can a house be in Woodstown?

R2: 35 ft; R3: 35 ft; R4: 35 ft.

How much of my lot can I cover in Woodstown?

R2: 20% lot coverage; R3: 20% lot coverage; R4: 20% lot coverage.

Can you recommend an architect in Woodstown?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Woodstown. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Woodstown and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the Borough of Woodstown's Chapter 67 Schedule of District Regulations, Maximum-Minimum Building Standards (Attachment 3). Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table