NJ Zoning Check

Elsinboro zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a house in Elsinboro and see, line by line, whether a house, addition, shed or detached garage meets the Township's lot, yard, coverage and height limits.

Covers the Township of Elsinboro's single-family zones MR, LR, RR-A and CONS, Salem County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 16, 2026 against the Township's Standards and Use Schedules (Form 8, July 1, 2010).

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Elsinboro

Elsinboro has 4 single-family zones covered here: MR, LR, RR-A and CONS. Minimum lot sizes run from 18,000 sq ft (MR) to 5 acres (CONS). A house must sit 35 ft (MR) to 60 ft (CONS) back from the street and 30 ft (MR) to 60 ft (CONS) from the rear lot line. Houses can be up to 35 ft tall. Building coverage limits run from 5% (CONS) to 20% (MR).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
35 to 60 ft
From each side
15 to 30 ft
From the back
30 to 60 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings togetherEverything paved or built
MRLots of 18,000 sq ft35 ft15 ft30 ft35 ft20%25%
LRLots of 25,000 sq ft40 ft20 ft35 ft35 ft20%25%
RR-ALots of 75,000 sq ft50 ft25 ft50 ft35 ft15%15%
CONSLots of 5 acres60 ft30 ft60 ft35 ft5%5%
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Elsinboro zoning questions

What are the setbacks in Elsinboro, NJ?

For a single-family house. Corner lots can differ.

  • MR: 35 ft from the street, 15 ft on each side, 30 ft from the rear line.
  • LR: 40 ft from the street, 20 ft on each side, 35 ft from the rear line.
  • RR-A: 50 ft from the street, 25 ft on each side, 50 ft from the rear line.
  • CONS: 60 ft from the street, 30 ft on each side, 60 ft from the rear line.

What is the minimum lot size in Elsinboro?

MR: 18,000 sq ft; LR: 25,000 sq ft; RR-A: 75,000 sq ft; CONS: 5 acres.

How tall can a house be in Elsinboro?

MR: 35 ft; LR: 35 ft; RR-A: 35 ft; CONS: 35 ft.

How much of my lot can I cover in Elsinboro?

MR: 20% building coverage, 25% lot coverage; LR: 20% building coverage, 25% lot coverage; RR-A: 15% building coverage, 15% lot coverage; CONS: 5% building coverage, 5% lot coverage.

Can you recommend an architect in Elsinboro?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Elsinboro. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Elsinboro and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the Township of Elsinboro's Standards and Use Schedules (Form 8), dated July 1, 2010. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table