NJ Zoning Check

Elmer zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a single-family house in Elmer's LR-1, LR-2, LM or MR zone and see, line by line, whether a house, addition, detached garage or shed meets the Borough's lot, yard, height and building coverage limits.

Covers the Borough of Elmer's single-family zones LR-1, LR-2, LM and MR, Salem County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 16, 2026 against the Borough's Chapter 25, Appendix C, Schedule of District Regulations.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Elmer

Elmer has 4 single-family zones covered here: LR-1, LR-2, LM and MR. Minimum lot sizes run from 12,000 sq ft (MR) to 30,000 sq ft (LR-1). A house must sit 30 ft (MR) to 35 ft (LR-1) back from the street and 30 ft (LM) to 35 ft (LR-1) from the rear lot line. Houses can be up to 35 ft tall. Building coverage limits run from 10% (LM) to 20% (LR-1).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
30 to 35 ft
From each side
15 to 20 ft
From the back
30 to 35 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightAll buildings together
LR-1Lots of 30,000 sq ft35 ft20 ft35 ft35 ft20%
LR-2Lots of 30,000 sq ft35 ft20 ft35 ft35 ft20%
LMLots of 20,000 sq ft35 ft15 ft30 ft35 ft10%
MRLots of 12,000 sq ft30 ft15 ft30 ft35 ft20%
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Elmer zoning questions

What are the setbacks in Elmer, NJ?

For a single-family house. Corner lots can differ.

  • LR-1: 35 ft from the street, 20 ft on each side, 35 ft from the rear line.
  • LR-2: 35 ft from the street, 20 ft on each side, 35 ft from the rear line.
  • LM: 35 ft from the street, 15 ft on each side, 30 ft from the rear line.
  • MR: 30 ft from the street, 15 ft on each side, 30 ft from the rear line.

What is the minimum lot size in Elmer?

LR-1: 30,000 sq ft; LR-2: 30,000 sq ft; LM: 20,000 sq ft; MR: 12,000 sq ft.

How tall can a house be in Elmer?

LR-1: 35 ft; LR-2: 35 ft; LM: 35 ft; MR: 35 ft.

How much of my lot can I cover in Elmer?

LR-1: 20% building coverage; LR-2: 20% building coverage; LM: 10% building coverage; MR: 20% building coverage.

Can you recommend an architect in Elmer?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Elmer. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Elmer and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the Borough of Elmer's Chapter 25, Attachment 3, Appendix C (Schedule of District Regulations) and Ord. No. 2014-17. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table