NJ Zoning Check

Salem zoning check

Enter your address to find your zone and see if your project fits. No account needed.

About these numbers

Enter a lot with a detached house in the City of Salem's R-1 or R-2 residence district and see, line by line, whether a house, addition or detached garage meets the City's lot, yard, height and building area limits.

Covers the City of Salem's single-family zones R-1 and R-2, Salem County. Checks a new house, an addition, an attached garage or a detached garage or shed.

Numbers last checked November 16, 2026 against the City's Chapter 130, Sections 130-49, 130-52, 130-78 and 130-80.

Check a different address

We send the address to New Jersey's public parcel records and public zoning maps to find your lot. Privacy

Know your zone? Leave the address blank.Detailed check for architects and contractors

What you can build in Salem

Salem has 2 single-family zones covered here: R-1 and R-2. Each needs a lot of at least 7,200 sq ft. Houses can be up to 35 ft tall. Building coverage limits run from 30% (R-1) to 40% (R-2).

New house or addition

Depends on your zone. Your address will show your exact numbers.

From the street
Depends on your lot
From each side
7 to 8 ft
From the back
20 to 25 ft
Height
35 ft
See the limits for every zone
ZoneFrontEach sideRearHeightBuilding area
R-1Lots of 7,200 sq ftVaries8 ft, 20 ft total25 ft35 ft30%
R-2Lots of 7,200 sq ftVaries7 ft, 20 ft total20 ft35 ft40%
  • Varies means the limit depends on details of your lot. Check your address to see what we can work out.
  • Coverage is a share of the lot.

Sheds and detached garages have their own rules. Enter your address above to see them.

Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.

Salem zoning questions

What are the setbacks in Salem, NJ?

For a single-family house. Corner lots can differ.

  • R-1: 8 ft on each side (20 ft in total), 25 ft from the rear line.
  • R-2: 7 ft on each side (20 ft in total), 20 ft from the rear line.

What is the minimum lot size in Salem?

R-1: 7,200 sq ft; R-2: 7,200 sq ft.

How tall can a house be in Salem?

R-1: 35 ft; R-2: 35 ft.

How much of my lot can I cover in Salem?

R-1: 30% building coverage; R-2: 40% building coverage.

Can you recommend an architect in Salem?

Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Salem. It's free and there's no obligation.

We'll connect you with a vetted, licensed residential architect who works in Salem and can turn what your lot allows into drawings for your permit. Free, with no obligation.

Get a free architect referral

Zoning table for your drawings

ITEMREQUIREDEXISTINGPROPOSEDCOMPLIES

ENC = existing nonconforming condition, not increased. * = relief required.

Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.

What this does not check

Where the numbers come from

Requirements were entered on November 16, 2026 from the City of Salem's Chapter 130, Part 3, Zoning, Sections 130-49, 130-52, 130-78 and 130-80. Check every requirement against the current code before relying on it.

A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.

Pick a zone to startSee the table