Enter your address to find your zone and see if your project fits. No account needed.
About these numbers
Enter a lot in Swedesboro's R-1 or R-2 Residence District and see, line by line, whether a house, addition or detached garage meets the Borough's lot, yard, height and coverage limits. The check is free.
Covers the Borough of Swedesboro's single-family zones R-1 and R-2, Gloucester County. Checks a new house, an addition, an attached garage or a detached garage or shed.
Swedesboro has 2 single-family zones covered here: R-1 and R-2. Each needs a lot of at least 3,000 sq ft in most zones. A house must sit 25 ft (R-2) to 30 ft (R-1) back from the street and 25 ft from the rear lot line. Houses can be up to 35 ft tall. Building coverage limits run from 30% (R-1) to 40% (R-2).
New house or addition
Depends on your zone. Your address will show your exact numbers.
From the street
25 to 30 ft
From each side
6 to 8 ft
From the back
25 ft
Height
35 ft
See the limits for every zone
Zone
Front
Each side
Rear
Height
Building area
R-1
30 ft
8 ft, 20 ft total
25 ft
35 ft
30%
R-2Lots of 3,000 sq ft
25 ft
6 ft, 16 ft total
25 ft
35 ft
40%
Coverage is a share of the lot.
Sheds and detached garages have their own rules. Enter your address above to see them.
Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 15, 2026. Confirm with the town before you design or buy.
Swedesboro zoning questions
What are the setbacks in Swedesboro, NJ?
For a single-family house. Corner lots can differ.
R-1: 30 ft from the street, 8 ft on each side (20 ft in total), 25 ft from the rear line.
R-2: 25 ft from the street, 6 ft on each side (16 ft in total), 25 ft from the rear line.
What is the minimum lot size in Swedesboro?
R-2: 3,000 sq ft. In the other zones it depends on the lot.
How tall can a house be in Swedesboro?
R-1: 35 ft; R-2: 35 ft.
How much of my lot can I cover in Swedesboro?
R-1: 30% building coverage; R-2: 40% building coverage.
Can you recommend an architect in Swedesboro?
Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Swedesboro. It's free and there's no obligation.
We'll connect you with a vetted, licensed residential architect who works in Swedesboro and can turn what your lot allows into drawings for your permit. Free, with no obligation.
Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.
Rules that stand out
Drawn from this town's rules and the other zones on this site. Confirm each one with the zoning officer.
The full table is unlocked on this browser.
Get the full report
The check above shows whether each line complies. The full report gives every requirement for your zone and the complete table, with every line filled in and ready to copy or print onto a drawing sheet. It's a one-time purchase, and one key unlocks every town on this site, for as many projects as you like.
By buying or unlocking the full report you agree to the terms of use.
What this does not check
Semidetached houses in R-2, the R-3, R-IH, commercial and manufacturing districts.
Front yard exceptions that follow existing houses (Section 340-28), fences, pools, flood rules and permitted uses.
Where the numbers come from
Requirements were entered on November 15, 2026 from the Borough of Swedesboro's Chapter 340, Zoning, Article III (R-1, amended March 18, 2024 by Ord. No. 2-2024), Article IV (R-2), and Sections 340-17 and 340-22. Check every requirement against the current code before relying on it.
A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.