Enter your address to find your zone and see if your project fits. No account needed.
About these numbers
Enter a single-family lot in Pitman's R-A, R-1 or R-2 district and see, line by line, whether a house or addition meets the Borough's lot, yard, height and coverage limits.
Covers the Borough of Pitman's single-family zones R-A, R-1 and R-2, Gloucester County. Checks a new house, an addition or an attached garage.
Pitman has 3 single-family zones covered here: R-A, R-1 and R-2. Minimum lot sizes run from 5,000 sq ft (R-2) to 7,500 sq ft (R-1) in most zones. A house must sit 20 ft (R-2) to 35 ft (R-A) back from the street and 20 ft (R-2) to 30 ft (R-A) from the rear lot line. Houses can be up to 35 ft tall. Building coverage limits run from 25% (R-1) to 30% (R-2) in R-1 and R-2; in R-A it depends on the lot.
New house or addition
Depends on your zone. Your address will show your exact numbers.
From the street
20 to 35 ft
From each side
6 to 12 ft
From the back
20 to 30 ft
Height
35 ft
See the limits for every zone
Zone
Front
Each side
Rear
Height
All buildings together
R-A
35 ft
12 ft, 30 ft total
30 ft
35 ft
Varies
R-1Lots of 7,500 sq ft
30 ft
8 ft, 20 ft total
25 ft
35 ft
25%
R-2Lots of 5,000 sq ft
20 ft
6 ft, 16 ft total
20 ft
35 ft
30%
Varies means the limit depends on details of your lot. Check your address to see what we can work out.
Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 9, 2026. Confirm with the town before you design or buy.
Pitman zoning questions
What are the setbacks in Pitman, NJ?
For a single-family house. Corner lots can differ.
R-A: 35 ft from the street, 12 ft on each side (30 ft in total), 30 ft from the rear line.
R-1: 30 ft from the street, 8 ft on each side (20 ft in total), 25 ft from the rear line.
R-2: 20 ft from the street, 6 ft on each side (16 ft in total), 20 ft from the rear line.
What is the minimum lot size in Pitman?
R-1: 7,500 sq ft; R-2: 5,000 sq ft. In the other zones it depends on the lot.
How tall can a house be in Pitman?
R-A: 35 ft; R-1: 35 ft; R-2: 35 ft.
How much of my lot can I cover in Pitman?
R-1: 25% building coverage; R-2: 30% building coverage. In the other zones it depends on the lot.
Can you recommend an architect in Pitman?
Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Pitman. It's free and there's no obligation.
We'll connect you with a vetted, licensed residential architect who works in Pitman and can turn what your lot allows into drawings for your permit. Free, with no obligation.
Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.
Rules that stand out
Drawn from this town's rules and the other zones on this site. Confirm each one with the zoning officer.
The full table is unlocked on this browser.
Get the full report
The check above shows whether each line complies. The full report gives every requirement for your zone and the complete table, with every line filled in and ready to copy or print onto a drawing sheet. It's a one-time purchase, and one key unlocks every town on this site, for as many projects as you like.
By buying or unlocking the full report you agree to the terms of use.
What this does not check
Reduced yards on older undersized lots (Section 35-24.1).
Detached garages, sheds and decks.
Semi-detached homes in R-2.
Other districts.
Fences, pools, flood rules and permitted uses.
Where the numbers come from
Requirements were entered on November 9, 2026 from the Borough's Chapter 35, Sections 35-4.2, 35-4.3, 35-5.2, 35-5.3, 35-6.2 and 35-6.3. Check every requirement against the current code before relying on it.
A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.