Enter your address to find your zone and see if your project fits. No account needed.
About these numbers
Enter a lot with a single-family house in Monroe Township's R-1, R-2 or R-3 district and see, line by line, whether a new house or addition meets the Township's lot, yard and coverage limits.
Covers the Township of Monroe's single-family zones R-1, R-2 and R-3, Gloucester County. Checks a new house, an addition or an attached garage.
Monroe (Gloucester) has 3 single-family zones covered here: R-1, R-2 and R-3. Minimum lot sizes run from 10,000 sq ft (R-1) to 3 acres (R-3). A house must sit 30 ft (R-1) to 100 ft (R-3) back from the street and 25 ft (R-1) to 50 ft (R-3) from the rear lot line. Up to 40% of the lot may be covered.
New house or addition
Depends on your zone. Your address will show your exact numbers.
From the street
30 to 100 ft
From each side
10 to 25 ft
From the back
25 to 50 ft
See the limits for every zone
Zone
Front
Each side
Rear
Height
Everything built on the lot
R-1Lots of 10,000 sq ft
30 ft
10 ft
25 ft
—
40%
R-2Lots of 32,670 sq ft
50 ft
25 ft
25 ft
—
40%
R-3Lots of 3 acres
100 ft
20 ft
50 ft
—
40%
A dash means this check has no limit for that item.
Standard limits for single-family lots. Corner lots and special rules can change them. Last checked November 16, 2026. Confirm with the town before you design or buy.
Monroe (Gloucester) zoning questions
What are the setbacks in Monroe (Gloucester), NJ?
For a single-family house. Corner lots can differ.
R-1: 30 ft from the street, 10 ft on each side, 25 ft from the rear line.
R-2: 50 ft from the street, 25 ft on each side, 25 ft from the rear line.
R-3: 100 ft from the street, 20 ft on each side, 50 ft from the rear line.
What is the minimum lot size in Monroe (Gloucester)?
How much of my lot can I cover in Monroe (Gloucester)?
R-1: 40% lot coverage; R-2: 40% lot coverage; R-3: 40% lot coverage.
Can you recommend an architect in Monroe (Gloucester)?
Yes. Tell us about your project and we'll connect you with a vetted, licensed residential architect who works in Monroe (Gloucester). It's free and there's no obligation.
We'll connect you with a vetted, licensed residential architect who works in Monroe (Gloucester) and can turn what your lot allows into drawings for your permit. Free, with no obligation.
Prepared with a calculation aid. Not a zoning determination. Confirm every requirement with the municipal zoning officer.
Rules that stand out
Drawn from this town's rules and the other zones on this site. Confirm each one with the zoning officer.
The full table is unlocked on this browser.
Get the full report
The check above shows whether each line complies. The full report gives every requirement for your zone and the complete table, with every line filled in and ready to copy or print onto a drawing sheet. It's a one-time purchase, and one key unlocks every town on this site, for as many projects as you like.
By buying or unlocking the full report you agree to the terms of use.
What this does not check
Building height (Section 175-109) and accessory buildings (Section 175-89).
The 30 ft side yard along the side street of an R-1 corner lot and the R-2 driveway side yard.
Regional Growth, Pinelands, cluster and every other district.
Where the numbers come from
Requirements were entered on November 16, 2026 from the Township of Monroe's Chapter 175, Attachment 5, as amended by Ord. No. O:18-2024. Check every requirement against the current code before relying on it.
A calculation aid, not a zoning determination. Using this site means you agree to the terms of use; see also the privacy policy.